[Booklet] - Blank Cover - [With Cover]
Overview
Configure the paper settings for the front cover and back cover when attaching blank covers to a booklet.
When a cover is attached, blank paper is inserted first regardless of the simplex/duplex mode of the original or copy.
NOTICE
- PostInserter PI-502 is required to feed blank covers from the Post inserter tray.
Tips
- To attach blank covers to a booklet, load cover paper of the same size as the body set into any Paper tray or the Post inserter tray. For details, refer to [Front Cover Setting] / [Back Cover Setting].
If all cover sheets are set to [ON], they are printed in the following order.
1. [Front Cover] - [<PI Paper>]
2. [Front Cover] - [<Tray Paper>]
3. Tray paper of body set
4. [Back Cover] - [<Tray Paper>]
5. [Back Cover] - [<PI Paper>]
Setting Items
Setting item | Description | ||
|---|---|---|---|
[Front Cover] | [<Tray Paper>] | [OFF] | Does not attach a front or back cover. |
[ON] | Attaches a front cover by feeding paper from the selected tray. | ||
[Back Cover] | [Paper Setting] | Configures the paper setting for the front or back cover. This setting is available when [ON] is selected in [<Tray Paper>]. | |
[Front Cover] | [<PI Paper>] | [OFF] | Does not attach a front or back cover. |
[ON] | Attaches a front or back cover by feeding paper from the Post inserter. | ||
[Back Cover] | [Paper Setting] | Configures the paper setting for the front or back cover. This setting is available when [ON] is selected in [<PI Paper>]. | |
[Quantity] | Sets the number of sheets to load into the Post inserter tray. This setting is available when [ON] is selected in [<PI Paper>]. | ||
Setting Procedure
This section describes how to configure settings when [<Tray Paper>] or [<PI Paper>] is set to [ON].
1
Press [Paper Setting] of [<Tray Paper>] or [<PI Paper>].
The [Paper Setting] screen is displayed.
2
To use the registered paper profile, press [Profile No.] and recall it.
3
Set [Paper Tray].
Use the paper tray selection key to select a Paper tray.
For [<PI Paper>], [PI1] and [PI2] are only selectable as the Paper tray.
4
Set [Paper Size].
Use the standard paper size selection key to select the paper size.
5
To select the custom size, press [Custom] of [Paper Size].
The setting screen is displayed.
6
Use the on-screen keypad to enter the paper size.
Range: [(1)Vertical]: 100 mm to 330.2 mm, [(2)Horizontal]: 148 mm to 487.7 mm
To use the custom size registered in this system, press [Size Recall]. For details, refer to Setting Procedure (Setting the Custom Paper Size).
7
Set [Paper Type].
8
Set [Weight].
9
Set [Colored Paper].
To use the [User Color] registered in this system, press [Recall], and configure the setting. For details, refer to [Colored Paper].
For [<PI Paper>], [Colored Paper] is not available.
10
Configure settings for [Punch].
For [<PI Paper>], [Punch] is not available.
11
Press [OK].
12
For [<PI Paper>], press [Quantity].
The setting screen is displayed.
13
Use the on-screen keypad to enter the number of sheets fed from the Post inserter.
Range: 1 to 40
14
Press [OK].
in the upper-right of a page, it turns into 
and is registered as a bookmark.