Taking Out Booklets from the Booklet Tray
When the booklet tray becomes full, the following message will appear in the message area of the screen.
[Booklet tray of ring binder is full / Please remove booklet]
The display panel of the ring binder shows the [ALERT - Supplies/Trays] screen with the message [Empty Booklet Drawer] displayed.
Follow the procedure below to take out booklets from the booklet tray.
Follow the procedure below to take out booklets from the booklet tray.
Withdraw the booklet tray.
Never withdraw the booklet tray of the ring binder while the machine
operation is in process. Otherwise, a paper jam may be caused.
Take out booklets from the booklet tray.
Return the booklet tray to its original position.
If the booklet tray is not returned securely in place, the message [Please close front door of ring binder booklet tray] will be displayed in the message area of the screen.
The display panel of the ring binder shows the ALERT - Supplies/Trays screen with the message [Close Booklet Drawer] displayed.
Flip over the back cover of the booklet.
An output booklet is bound in order of the back cover, front cover, and body sheets as shown in the illustration on the right. (1: front cover, 2: back cover)
To improve the appearance of the bound booklet, flip the back cover over so that the spine of the bind part should be hidden between the back cover and the last page of body sheets. (1: front cover, 2: back cover)
