With Folding Unit FD-503 mounted, the following fold and punch patterns are available.
Fold:
Six folding types are available; [Z-Fold], [Tri-Fold-in], [Tri-Fold-out], [Double Parallel], [Gate], and [Half Fold]. Specify the print side ([outside] or [inside]) for each fold mode except Z-Fold.
Original | Output | |||||
[Z- Fold] | [Tri-Fold-in] | [Tri-Fold-out] | ||||
[Outside Print] | [Inside Print] | [Outside Print] | [Inside Print] | |||
[Double Parallel] | [Gate] | [Half-Fold] | ||||
[Outside Print] | [Inside Print] | [Outside Print] | [Inside Print] | [Outside Print] | [Inside Print] | |
Punch:
Punches 2, 3 or 4 holes in printed sheets for filing purposes. Specify the desired punch position (left/right/top) according to the original set direction.
Original | Output | ||
[2-Hole Punch] | |||
[Left] | [Right] | [Top] | |
[3-Hole Punch] | |||
[Left] | [Right] | [Top] | |
[4-Hole Punch] | |||
[Left] | [Right] | [Top] | |
Setting Item | Description |
---|---|
Number of punch holes | Metric area: 2 holes, 4 holes Inch area: 2 holes, 3 holes |
Hole diameter | 2 holes: 6.5 mm ± 0.5 mm / 0.26" ± 0.02" 3 holes: 8.0 mm ± 0.5 mm / 0.31" ± 0.02" 4 holes: 6.5 mm ± 0.5 mm / 0.26" ± 0.02" |
Hole pitch | Metric area: 2 holes: 80 mm ± 0.5 mm / 3.15" ± 0.02" 4 holes: 80 mm ± 0.5 mm / 3.15" ± 0.02" Inch area: 2 holes: 70 mm ± 0.5 mm / 2.76" ± 0.02" 3 holes: 108 mm ± 0.5 mm / 4.25" ± 0.02" |
Paper size | A3 to A5 |
Paper weight | 62 g/m2 to 128 g/m2 / 16 lb Bond to 33 lb Bond |
When Folding Unit FD-503 is used as a single finishing option, the primary (main) tray and multi folder tray are available to be allotted with output modes as described below.
Tray | Output mode |
---|---|
Primary (main) tray | Half-Fold, Z-Fold, Punch, not processed (straight delivery) |
Multi folder tray | Tri-Fold-in, Tri-Fold-out, Double Parallel, Gate |
The secondary (sub) tray is also available in place of the multi folder tray. Contact your service representative.
For details, refer to each of the following pages.