Taking Out Perfect-Bound Books from Perfect Binder Tray
Tray capacity is approx. 6,600 sheets, stacked with 11 sets 30 mm thick x 2 columns.
The machine piles up the first column on the right side of the perfect binder tray, then slide it to the left side onto the carriage to pile up the second column.
Check the stacks through the perfect binder tray window.
If piled books are shown only on the right side of the tray, proceed to step 2.
If two columns of books are shown on the tray, proceed to step 3.
Press the feeding button to move the piled books to the right side carriage.
Delivery to the perfect binder tray is available even if the carriage is not mounted inside the perfect binder tray. In this case, tray capacity is a half of that with the carriage mounted. (1 set 30 mm thick
11 1 column = approx. 3,300 sheets)
The feeding button does not function while the machine is delivering finished books onto the perfect binder tray.
The feeding button does not function without the carriage mounted.
Open the perfect binder tray front door.
The perfect binder tray front door does not open while the machine is delivering finished books onto the perfect binder tray, or sliding them with the feeding button pressed.
Slowly withdraw the carriage.
Be sure to withdraw the carriage slowly. Otherwise, the piled books may collapse.
When moving the carriage with books piled on it, use the book holding plate and book stopper to fix the books onto the carriage, in order to prevent them from collapsing.
Move the book holding plate lever to align the book holding plate to the books.
Insert the book stopper into the desired positioning hole on the carriage to align it to the books.
Take out the books from the carriage.
Before taking out the books, be sure to remove the book holding plate and book stopper, if used.
Return the carriage to its original position, then close the perfect binder tray front door.
If the column of books is left on the right side of the tray, repeat steps from 2 to 7.