Home CopySettings for Execute Sample Print: Setting Execute Sample Print before Outputting

Settings for Execute Sample Print: Setting Execute Sample Print before Outputting

To set Sample Print conditions, press [Sample Print Set.] on the [MACHINE] screen before printing. With this function set, the machine automatically delivers a sample print in specified cycle during the output job.

  • Specify whether or not to perform Sample Print.

  • When setting Sample Print, select [Print Per Sheet Cycle] to output a sample in every specified number of sheets, or [Print Per Set Number] to output a sample in every specified set count.

  • Selecting [a: Sheet Cycle] of [Print Per Sheet Cycle] allows you to specify the number of sheets in a cycle from 1 to 9,999. Set number is not canceled even if the sub power switch is turned off, Auto Reset is activated, or Reset on the control panel is pressed. To change the setting, press [Sample Print Set.] in the [MACHINE] screen.

  • Selecting [Print Per Set Number] requires the settings of [b: IntervalSetNumber] to set the count for making a sample print, and [c:Sheet Number] to set the page number of the set to be printed as a sample. Setting range for [b: IntervalSetNumber] is from 1 to 9,999. Setting range for [c:Sheet Number] is from 1 to 9,999.

  • If you select [Do Not Sample Print], Sample Print is not performed.

  • Sample Print is unavailable without setting the secondary (sub) tray for sample prints. Contact your service representative.

  1. Position the original, then press the [COPY] tab to display the [COPY] screen.

  2. Make copy selections, as desired.

  3. Press the [MACHINE] tab to display the [MACHINE] screen.

  4. Press [Sample Print Set.].

    The [Sample Print Setting] screen is displayed.

  5. Select either [Print Per Sheet Cycle] or [Print Per Set Number].

    • When you select [Print Per Sheet Cycle], enter the desired number of sheets in a cycle using the touch panel keypad, or [][].

    • When you select [Print Per Set Number], first select [b: Interval Set Number], then enter the desired set count in a cycle using the touch panel keypad or [][].

    • Next, select [c: Sheet Number], then enter the desired page number for the sample print using the touch panel keypad or [][].

  6. Press [OK].

    The screen returns to the [MACHINE] screen.

  7. Press the [COPY] tab to display the [COPY] screen.

  8. Press Start on the control panel.

    The machine starts the output job, and automatically delivers a sample print to the secondary (sub) tray of the finishing option in specified cycle.

    • To stop the set sample printing, press the [MACHINE] tab to display the [MACHINE] screen, then press [Sample Print Set.] to select [Do Not Sample Print].