Home CopyPage Margin: Adjusting Position of Copy Image

Page Margin: Adjusting Position of Copy Image

Use this function to create a binding margin on copies in order to make it easier for filing purposes, and also to adjust the position of copy image on both front and back sides when making 2-sided copies, in order to correct the image dislocation.

When [Booklet] or [2 Repeat] mode of Image Repeat has been already selected, this function allows you to make the desired amount of blank space between the two images on a page.

Original

Output

  • Available shift directions are [Top], [Bottom], [Right], and [Left].

  • Shift amount: 0 mm to 250 mm in 0.1 mm increments

  • When [Booklet] or [2 Repeat] mode of [Image Repeat] has already been selected, the Page Space key appears clear on the screen to show its availability.

  • Page Space width: 0 mm to 250 mm in 0.1 mm increments

  1. Position the original.

  2. Display the [COPY] screen and press the desired button under [Simplex/Duplex].

  3. Press [Application] on the [COPY] screen.

  4. Press [Page Margin] on the [Application] screen.

  5. Select the side of copy paper to be adjusted with image position.

    Select [Front Side], [Back Side], or [Double Sided] under [Image Side].

    • For 1-sided copies, only the front side setting will be effective.

    • To have the same shift amount on both sides of 2-sided copies, select [Double Sided].

  6. Specify the shift direction and amount.

    Use [Top] or [Bottom] to shift the image in lengthwise direction, and [Right] or [Left] in widthwise direction.

    • Select the desired shift direction key. Use the touch panel keypad or [][] to enter the desired shift amount.

    • Shift amount: 0 mm to 250 mm in 0.1 mm increments

    • Shift direction should be based on [Direction] specified on the [COPY] screen.

  7. To specify the shift amount individually for the front and back sides, select either [Front Side] or [Back Side] under [Image Side], then enter the shift amount for each as described in step 6.

  8. To use the Page Space function, select [Page Space] and enter the desired page space amount.

    • The [Page Space] key appears clear on the screen only when [Booklet] or [2 Repeat] mode of [Image Repeat] has already been selected.

    • [Page Space] width: 0 mm to 250 mm in 0.1 mm increments

    • For the [Page Space] amount, shift direction is not needed to be specified.

  9. Press [OK] to complete the setting.

    • To resume the original settings, press [Cancel]. To cancel the [Page Margin] function with the current setting saved, press [Function OFF].

  10. Press [OK] on the [Application] screen to return to the [COPY] screen.

    The [Page Margin] icon is displayed under [Application] on the [COPY] screen.

  11. Enter the desired print quantity from the keypad on theĀ control panel.

  12. Press Start on the control panel.

    • Printing does not start without returning to the [COPY] screen. Be sure to display the [COPY] screen.

About Page Space

The [Page Space] function is available only when [Booklet] or [2 Repeat] mode of [Image Repeat] has already been selected. Use this function to make the desired amount of blank space between the two images on a page.

[Booklet]

[Page Space]

[2 Repeat] mode of [Image Repeat]

[Page Space]