Various settings can be performed to match finished results.
The following items can be set.
[Combine]: Refer to Combine: Copying Fixed Number of Pages onto One Sheet.
[Booklet]: Refer to Booklet: Copying as Booklet.
[Book Copy]: Refer to Book Copy: Copying Left and Right Pages of a Two Page Spread Original Separately.
[No Image Area Erase]: Refer to No Image Area Erase: Erasing the Non-Image Area.
[Repeat]: Refer to Image Repeat: Repeatedly Copying One Image onto One Paper.
[Frame Center Erase]: Refer to Frame Center Erase: Eliminating Black Copy Mark around Border and Center of Book.
[Image Centering]: Refer to Image Centering: Copying Image onto the Center of Paper.
[Page Margin]: Refer to Page Margin: Adjusting Position of Copy Image.
[Stamp]: Refer to Stamp: Copying with Additional Information Printed.
When copying using an Application Setting, select the desired functions on the [Application] screen.
Press [COPY] tab on the screen.
Press [Application] on the [COPY] screen.
The [Application] screen is displayed.
When pressing a button for each function, the corresponding screen to set the function is displayed (no corresponding screen for [No Image Area Erase] and [Image Centering]).
Various functions can be used in combination, however, if one function on the menu is incompatible with another, it will appear grayed out.
To resume the previous copy conditions, press [Cancel]. Press [All OFF] to clear all the application selections with the setting made for each saved. To resume the default setting for all copying features including [output settings], press Reset on the control panel.
Press [OK] on the [Application] screen to return to the [COPY] screen.
Printing does not start without returning to the [COPY] screen. Be sure to display the [COPY] screen when you start printing.