Home CopyOutputting to the Secondary (Sub) Tray

Outputting to the Secondary (Sub) Tray

Output mode

Description

[Sort]

Outputs multiple copies of the original set. Copies are stacked upon exit without being offset.

[Group]

Groups together multiple copies of each original. Copies are stacked upon exit without being offset.

Combined with the output modes above, you can also select the desired Face ([Face Up] or [Face Down]) and Order ([1 to N] or [N to 1]), as needed.

  1. Position the original.

  2. Press the [COPY] tab to display the [COPY] screen.

  3. Press [Output Setting].

    The [Output Setting] screen is displayed.

  4. Select the secondary (sub) tray as output tray.

    • On the front image of the machine in the [Output Setting] screen, the tray currently selected is highlighted. If the secondary (sub) tray is not selected as an output tray, press the secondary (sub) tray position button .

  5. Select the desired output mode.

    Select either [Sort] or [Group] provided under [Output].

    Select the desired Face ([Face Up] or [Face Down]) and Order ([1 to N] or [N to 1]), as needed.

    • Selecting [N to 1] automatically sets and limits the Face mode to [Face Up].

  6. Press [OK] on the [Output Setting] screen.

    An icon representing specified function is displayed under [Output Setting] on the [COPY] screen.

    • Be careful not to exceed the stacker tray capacity, otherwise unexpected trouble may be caused.