The following features can be provided by switching the selection.
Setting options (with default bolded)
One Shot Message Indication Time
Select the time span to display a shot message, such as Original size is A4, in the message area of the touch panel.
3 seconds, 5 seconds
Offset by Job Unit
Specify whether or not to offset the output sheets by job.
Also specify the number of jobs to be offset when selecting ON for this function (default: 1).
Specify whether or not to output multiple reserve jobs in succession without stopping the machine at a job break.
Copy ON, Copy OFF, Printer ON, Printer OFF
Back Side Magnification Adjustment
Specify whether to enable the lens adjustment mode.
Fusing Stability (Mixed Media)
Select what to prioritize when fusing.
Best Quality, Better Quality, Speed, Highest Speed
Prior Paper Type
Specify the temperature setting of the fusing section on standby. It can shorten the waiting time before printing by selecting a frequently used paper.
Dash Length(Page Stamp)
Select the length of the dash to be used in a style of Page No. in Stamp.
Center Crop Mark Trim Margin
Specify the space between the center crop mark and image area (center crop mark trim margin).
0.0 mm to 20.0 mm (Default: 1.0)
Schedule Cross Axis Unit (Default)
Select the unit of horizontal axis on the Schedule screen.
Timetable, Time Frame (m), Sheet Volume
Hold Job Status after Output (Default)
Select the default value to delete or save the data of hold job after outputting.
Offset Output Mode
Specify how to offset the output sets.
Change Out Pos., Stop Print, Change Out Position + Partition Paper (Tray1 to Tray9, PI 1, PI 2), Partition Paper (Tray1 to Tray9, PI 1, PI 2)
Hold Job Direct Output (Default)
Select the default for the Direct Output check box under the Hold Job screen.
ON selects the check box, and OFF clears the check box.
After the change, turn OFF/ON the power switch to apply the setting.
Needless Tab Paper Exit
Specify whether or not to automatically discharge the oddments of tabbed sheets loaded in a tray as a set for copy job.
Remaining Memory (Measurement Unit)
Select the unit of displaying the remaining memory.
Remaining Memory (Warning)
Select the percentage at which to give warning when the remaining memory is low.
5% or Less, 10% or Less
[Proof Copy] 1 Set/1st Sheet Selection
If it is turned ON, the confirmation window is opened and you are asked to output one confirmation copy or to output only its first page when the Proof Copy is pressed.
Both Sides Rotate/Skew
If Disable is selected, the Rotate/Skew adjustment does not become available and does not function.
Auto Image Adjustment Deviation Check
Select whether to automatically check a deviation. If you select ON, enter the specified value of a deviation.
ON (ON: 0.5 mm to 10.0 mm, Default: 2.0), OFF
Operation after Deviation Detected
Select how to perform operations when a deviation is detected. If you select Continue Output, select the paper tray to output data to and the number of deviation detection times.
Stop, Continue Output, Partition Paper Tray at Deviation (Tray1 to Tray9), Deviation Detection Count (2 to 10 times, Default: 2)
Select Chart Type (Auto Image Adj.)
Select an automatic image adjustment chart for each paper weight.
Follow the procedure on Displaying the [User Setting Menu] Screen to display the User Setting Menu screen.
Press Common Setting on the User Setting Menu screen.
Press one option for each item.
supplementary explanationThis setting screen has 6 pages to go through. Use Next or Previous to scroll.
supplementary explanationSelecting ON for Offset by Job Unit displays the Offset by Job Unit screen. Use the touch panel keypad to specify the number of jobs to be offset, then press OK. Available range is from 1 to 9,999.
supplementary explanationIf you select ON in Auto Image Adjustment Deviation Check, the Auto Image Adjustment Deviation Check screen is displayed. Enter the specified value of a deviation using the keypad on the screen, then press OK. Available range is from 0.5 to 10.0.
supplementary explanationIf you select Continue Output in Operation after Deviation Detected, Partition Paper Tray at Deviation and Deviation Detection Count become available. Specify the paper tray to output data to and the number of deviation detection times in the respective fields, and press OK. The available number of deviation detection times is from 2 to 10.
supplementary explanationIf you select Change in Select Chart Type (Auto Image Adj.), the Select Chart Type for Each Weight screen is displayed. Select an automatic image adjustment chart for each paper weight, and press OK.
Press OK to complete the setting.
supplementary explanationTo cancel the change, press Cancel.
In either case, the screen returns to the User Setting Menu screen.