Menu Item/Description | Setting Items/Options (with default bolded) | ||
---|---|---|---|
Device Setting Check the MAC address of this machine, and set the network speed. | |||
MAC Address | |||
LLTD Setting Select whether to use LLTD (Link Layer Topology Discovery). Using LLTD displays this machine on the network map in a Windows computer of Windows 7 or later (Windows 7/8.1/10/Server 2008/Server 2008 R2/Server 2012/Server 2012 R2). | Enable, Disable | ||
Network Speed | Auto (10M/100Mbps), Auto (10M/100M/1Gbps), 10Mbps Half-Duplex, 10Mbps Full-Duplex, 100Mbps Half-Duplex, 100Mbps Full-Duplex, 1Gbps Full-Duplex | ||
Time Adjustment Setting Configure the settings to automatically adjust the date and time of this machine, using the NTP (Network Protocol Server). | |||
Auto IPv6 Retrieval | ON, OFF | ||
NTP Server Address | Host Name Input Up to 253 one-byte characters can be used. *1 IPv4 Address Input 0.0.0.0 (0 to 255) Ipv6 Address Input 0: 0: 0: 0: 0: 0: 0: 0 | ||
Port Number | 1 to 65535 (123) | ||
Set Date | |||
Auto Time Adjustment | ON, OFF | ||
Polling Interval | 1 to 240 (24) (hrs) | ||
Status Notification Setting Configure this setting to send a notification to the specified destination when an alert such as paper jam is issued by this machine. | |||
1 Register Notification Address - IP Addresses 1 to 5 | ON, OFF | ||
Host Address | Host Name Input Up to 253 one-byte characters can be used. *1 IPv4 Address Input 0.0.0.0 (0 to 255) Ipv6 Address Input 0: 0: 0: 0: 0: 0: 0: 0 | ||
Port Number | 1 to 65535 (162) | ||
Community Name | public Up to 15 one-byte characters can be used. | ||
Notification Items | ON, OFF Service Call, Paper JAM, Replenish Paper Tray, Replenish Toner, PM Call, Replace Staples, Finisher Tray Full, Empty Hole-Punch Scrap Box, Waste Toner Box Full, Empty Staple Scrap Box, Bind Parts Supply, HDD (Pre-RIP/Form/Scan Data) Almost Full, HDD (Copy/RIPed Data) Almost Full | ||
1 Register Notification Address - IPX Address | ON, OFF | ||
Network Address | 00: 00: 00: 00 | ||
Node Address | 00: 00: 00: 00: 00: 00 | ||
Community Name | public Up to 15 one-byte characters can be used. | ||
Notification Items | ON, OFF Service Call, Paper JAM, Replenish Paper Tray, Replenish Toner, PM Call, Replace Staples, Finisher Tray Full, Empty Hole-Punch Scrap Box, Waste Toner Box Full, Empty Staple Scrap Box, Bind Parts Supply, HDD (Pre-RIP/Form/Scan Data) Almost Full, HDD (Copy/RIPed Data) Almost Full | ||
1 Register Notification Address - E-mail Addresses 1 to 5 | ON, OFF | ||
Edit E-mail Address | Up to 256 one-byte characters can be used. | ||
Notification Items | ON, OFF Service Call, Paper JAM, Replenish Paper Tray, Replenish Toner, PM Call, Replace Staples, Finisher Tray Full, Empty Hole-Punch Scrap Box, Waste Toner Box Full, Empty Staple Scrap Box, Bind Parts Supply, HDD (Pre-RIP/Form/Scan Data) Almost Full, HDD (Copy/RIPed Data) Almost Full | ||
PING Confirmation Check the connection between this machine and a destination device by using the ping function. | |||
PING TX Address | Host Name Input Up to 253 one-byte characters can be used. *1 IPv4 Address Input 0.0.0.0 (0 to 255) Ipv6 Address Input 0: 0: 0: 0: 0: 0: 0: 0 | ||
Check Connection | |||
SLP Setting Configure this setting to enable the Service Location Protocol (SLP), and to control this machine by the TWAIN driver via the network. | Enable, Disable | ||
LPD Setting Enable the Line Printer Daemon (LPD) to allow LPR (LPD) printing. | Enable, Disable | ||
Cert. Verifi. Setting Specify to validate the certificate of the destination device. *2 | ON, OFF | ||
Use SSL Version Set the SSL version to use. *2 | SSL3.0, TLS1.0, TLS1.1, TLS1.2 | ||
AD Auth. LDAP over SSL Specify to use LDAP over SSL with Active Directory authentication. | |||
AD Auth. LDAP over SSL | Enable, Invalid | ||
AD Auth. LDAP over SSL; Port No. | 1 to 65535 (636) | ||
Network Setting Clear Return the Network Settings of this machine to the factory default. | Start |
*1: | Up to 253 one-byte characters including periods can be entered for the host name. To enter 64 characters or more, you need to use periods (.) to separate the characters. |
*2: | You can use the advanced settings in the Administrator Mode of Web Connection (for details, refer to Overview of [Security] Tab). |