LDAP Settings

Enabling LDAP

Set whether to use the LDAP Server for destination search.

When sending the scanned original data, you can search for an E-mail address from the LDAP Server.

ON, OFF

Setting Up LDAP

Set the LDAP Server address and others.

Max. Search Results

5 to 100 (100)

Timeout

5 to 300 (60) (sec.)

Initial Setting for Search Details

Name

OR, AND, START WITH, ENDS WITH

E-mail

OR, AND, START WITH, ENDS WITH

Dial Number

OR, AND, START WITH, ENDS WITH

Last Name

OR, AND, START WITH, ENDS WITH

First Name

OR, AND, START WITH, ENDS WITH

City

OR, AND, START WITH, ENDS WITH

Company Name

OR, AND, START WITH, ENDS WITH

Department

OR, AND, START WITH, ENDS WITH

Server Address

Host Name Input

Up to 253 one-byte characters can be used. *

IPv4 Address Input

0.0.0.0 (0 to 255)

Ipv6 Address Input

0: 0: 0: 0: 0: 0: 0: 0

Search Base

Specify the start point of search when you search for users to authenticate.

A search is made, including the tree structure under the specified start point.

Up to 255 one-byte characters can be used.

Input example: "cn=users,dc=example,dc=com"

SSL Setting

ON, OFF

Port Number

1-65535 (389)

Port Number (SSL)

1 to 65535 (636)

Certificate Verification Level Settings

Expiration Date

Confirm, Do Not Confirm

Key Usage

Confirm, Do Not Confirm

Chain

Confirm, Do Not Confirm

Expiration Date Confirmation

Confirm, Do Not Confirm

CN

Confirm, Do Not Confirm

Authentication Type

Anonymous, Simple, Digest-MD5, GSS-SPNEGO, NTML v1, NTML v2

Select Sever Authentication Method

Use Settings, Use Dynamic Authentication

Referral Setting

ON, OFF

Login Name

Up to 255 one-byte characters can be used.

Password

Up to 128 one-byte characters can be used.

Domain Name

Up to 64 one-byte characters can be used.

Check Connection

―

Reset All Setting

Yes, No