Enhanced Security Mode

Specify whether or not to activate the Enhanced Security mode.

  • To turn the Enhanced Security mode ON, the service representative should set a CE authentication password and administrator password on the machine. From the UTILITY screen, go to Administrator Setting - Security Setting - HDD Management Setting - HDD Encryption Setting and change to ON.

  1. Follow the procedure on Displaying the [Administrator Setting Menu] Screen to display the Administrator Setting Menu screen.

  2. Press Security Setting on the Administrator Setting Menu screen and then press Enhanced Security Mode.

    The Enhanced Security Mode screen is displayed.

  3. Select ON to activate the Enhanced Security mode, or select OFF to deactivate it, then press OK.

    A confirmation dialog is displayed.

  4. Press Yes to complete the setting.

    The machine power will be turned off, then on automatically.

    • supplementary explanationTo cancel the change, press No, then press Cancel at the lower right corner of the screen to return to the Administrator Setting Menu screen.