1st Trans. Dis-elec. Output

To measure each AC/DC value for the first transfer discharge, specify the discharge volume for each of the Y, M, C, and K colors of the first transfer belt.

  1. Follow the procedure on Displaying the [Administrator Setting Menu] Screen to display the Administrator Setting Menu screen.

  2. Press System Setting on the Administrator Setting Menu screen, and then press Expert Adjustment, Process Adjustment, and 1st Trans. Dis-elec. Output in sequence.

  3. Select the desired condition for each of the Y, M, C, and K colors.

  4. Press OK to complete the setting.

    • supplementary explanationTo cancel the change, press Cancel. In either case, the screen returns to the Process Adjustment Menu screen.