Non-Image Area Erase

The following three options are provided to select the condition of Non-Image Area Erase function.

  • Erase Outside of Original: Always erase the outside area of the original.

  • ON - APS/AMS Only: Erase the outside area of the original only when Auto Paper or Auto Zoom is activated.

  • Except Orig. Glass(1:1): Erase the outside area except when making a same-sized copy as the original scanned from the original glass.

  1. Follow the procedure on Displaying the [Administrator Setting Menu] Screen to display the Administrator Setting Menu screen.

  2. Press System Setting on the Administrator Setting Menu screen, and then press Expert Adjustment, Erase Correction, and Non-Image Area Erase in sequence.

    The Original Scan Area Setting screen is displayed.

  3. Select the desired setting key.

  4. Press OK to complete the setting.

    • supplementary explanationTo cancel the change, press Cancel.

    In either case, the screen returns to the Erase Correction Menu screen.