SNMP Settings
Configure the settings to acquire machine information or monitor the machine by using Simple Network Management Protocol (SNMP).
Menu Item/Description | Setting Items/Options (with default bolded) | ||
|---|---|---|---|
SNMP Settings | ON, OFF | ||
SNMP v1/v2c (IP) | ON, OFF | ||
SNMP v3 (IP) | ON, OFF | ||
UDP Port Number | 1 to 65535 (161) | ||
SNMP V1/V2C Settings | |||
Read Community Name Settings | public Up to 15 one-byte characters can be used. | ||
Write Setting | Enable, Disable | ||
Write Community Name Settings | private Up to 15 one-byte characters can be used. | ||
SNMP V3 Settings | |||
Context Name Settings | Up to 63 one-byte characters can be used. | ||
Discovery User Permission | ON, OFF | ||
Discovery User Name Set | public Up to 32 one-byte characters can be used. * | ||
Read User Name Setting | initial Up to 32 one-byte characters can be used. * | ||
Security Level | OFF, auth-password, auth-password/priv-password | ||
Password Setting | |||
Read auth | AuthPassword 8 to 32 one-byte characters can be used. | ||
Read priv | PrivPassword 8 to 32 one-byte characters can be used. | ||
Write User Name Setting | restrict Up to 32 one-byte characters can be used. * | ||
Security Level | OFF, auth-password, auth-password/priv-password | ||
Password Setting | |||
Write auth | 8 to 32 one-byte characters can be used. MAC Address (colons ":" excluded) | ||
Write priv | 8 to 32 one-byte characters can be used. MAC Address (colons ":" excluded) | ||
Encryption Algorithm | DES, AES-128 | ||
Authentication Algorithm | MD5, SHA-1 | ||
TRAP Setting Select whether to allow you to notify the status of this machine using the SNMP TRAP function. | Allow, Restrict | ||
TRAP Setting When Authentication Failed | Enable, Invalid | ||
* "Discovery User Name" cannot be specified with the same entry as that for "Read User Name" or "Write User Name."