Specify whether or not to overwrite the temporary image data on the memory when the data is no longer needed, and also the erase mode for the data to be overwritten.
Overwrites with 0x00
Overwrites with 0x00 - Overwrites with 0xff - Overwrites with 0x61 - Verification
Follow the procedure on Displaying the [Administrator Setting Menu] Screen to display the Administrator Setting Menu screen.
Press Security Setting on the Administrator Setting Menu screen, and then press HDD Management Setting and Delete Temp. Data Setting in sequence.
The Delete Temporary Data Setting screen is displayed.
Select either ON or OFF for Setting Switch.
supplementary explanationWhen selecting ON, select either Mode 1 or Mode 2 for Erase Mode.
Press OK to complete the setting.
supplementary explanationTo cancel the change, press Cancel.
In either case, the screen returns to the HDD Management Setting Menu screen.
Turn OFF the sub power switch, and turn OFF the main power switch.
supplementary explanationDo not turn off the main power while the message Cooling in progress / After cooling, power off automatically is displayed.
Wait for more than 10 seconds.
Turn ON the main power switch, and turn ON the sub power switch.