This machine can be used as a printing system by mounting an optional image controller on the machine.
A print can be made on this machine from the application software installed on your computer via the printer driver.
When printing, you can configure a layout setting or finishing setting by following an easy procedure.
For details, refer to About Print Function.
You can specify conditions such as an original scan setting, paper size, and finishing setting to make a copy by mounting the optional image controller and Paper Feed Unit PF-711 on the machine.
For details, refer to Overview of Copy.
Scanned data can be sent to a target destination attached to an e-mail, sent to the shared computer (SMB server), FTP server, or WebDAV server, and saved on a USB flash drive connected to this machine by mounting the optional image controller and Paper Feed Unit PF-711 on the machine.
For details, refer to Overview of Scan Function.
The printed, copied, or scanned job can be stored on the machine’s HDD. The stored job can be re-printed or edited.
For details, refer to What is Job Management?.
This machine allows you to use various functions by mounting options.
Check the options compatible with the required functions, referring to the table below.
Simultaneous dual scan
Dual Scan Document Feeder (ADF) (Mounted in Paper Feed Unit PF-711 as standard.)
Fold & Staple
Folding Unit FD-503
Inserting Cover Paper
Saddle Stitcher SD-513 + Creaser Unit CR-101
Saddle Stitcher SD-513 + Trimmer Unit TU-503
Spine Corner Forming in Fold & Staple
Saddle Stitcher SD-513 + Folding Unit FD-504
Perfect Binder PB-503
Auto Ring Binder GP-502
Relay Unit RU-511
Automatically adjusting the image quality and image position during printing
Integrated Color Care Unit IQ-501
IC Card Authentication
Authentication Unit AU-201S