Auto Tray Selection Setting

Select the paper tray for paper feeding when APS is activated, and the paper tray to be switched when Auto Tray Switch (ATS) is activated. Trays cannot be selected separately.
You can also set the priority for the selected trays.

  • The priority setting for the selected trays also applies to the tray selected automatically due to the selection of APS Tray in Specify Default Tray APS OFF in Copy Setting under Administrator Setting. For details, refer to [Administrator Setting]: [Copy Setting].

  1. Follow the procedure on Displaying the [User Setting Menu] Screen to display the User Setting Menu screen.

  2. Press System Setting on the User Setting Menu screen, and then press Paper Tray Setting and Auto Tray Selection Setting in sequence.

  3. Using the buttons under ATS/APS Switch, select the paper feed tray to be used by the APS function and the tray to be switched by the ATS function.

    • supplementary explanationThe trays selected here are used when APS or ATS functions

  4. Specify the priority of selected trays using the buttons provided under Tray Priority.

    • supplementary explanationSelect the tray to change the order of priority, then use down or up to change it.

  5. Press OK to complete the setting.

    • supplementary explanationTo cancel the change, press Cancel. In either case, the screen returns to the Paper Tray Setting Menu screen.