Registering a Tone Curve

This section describes how to manage the saved tone curve. The management of the tone curve uses Tone Curve Management screen. For details about the Tone Curve Management screen, refer to [Tone Curve Management] Screen.

You can register the tone curve of Local, My Documents or Network in Controller. When you register the tone curve to the image controller, the adjusted tone curve can be adopted to the output.

  1. From tree view of Tone Curve Management, select Local, My Documents or Network where the tone curve profile (Extension: .xml) is saved.

    The list appears according to the selection.

  2. From the list, select the tone curve to register.

  3. Click Register.

    Register screen appears.

    • supplementary explanationWhen you select the multiple tone curve profiles, Register is not available.

    • supplementary explanationWhen a folder other than Controller is selected on the tree view, Register is not available.

    • supplementary explanationSimilar operation can be done when you select File menu - Register.

  4. Enter Saved Name and Memo.
    You can enter up to 31 one-byte characters (31 two-byte characters) to Saved Name.
    You can enter up to 64 one-byte characters (32 two-byte characters) to Memo.

    • supplementary explanationYou cannot specify the same name with those registered in the image controller.

  5. Click OK.

    The tone curve is registered to Controller.

    Register screen is closed to return to Tone Curve Management screen.