Calibration Flow

This section describes the basic operation of the Calibration Manager screen.

1. Select the calibration method.

   • supplementary explanationFor details, refer to Changing the Method.

2. Check the calibration state.

   • supplementary explanationFor details, refer to Confirming Conditions.

3. Specifies a colorimeter.

   • supplementary explanationFor details, refer to Changing the Colorimeter.

4. Set the paper type and screen.

   • supplementary explanationFor details, refer to Changing Paper and Screen.

5. Execute calibration.

   • supplementary explanationFor details, refer to Executing Calibration.

6. Execute accuracy measurement.

   • supplementary explanationFor details, refer to Measuring the Accuracy.

7. Execute the advanced calibration (Exact Color or G7 Calibration).

   • supplementary explanationFor details, refer to one of the following:
     Executing Exact Color CalibrationCalibrate by Using G7 Calibration

8. If necessary, reset the Calibration data.

   • supplementary explanationFor details, refer to Resetting Data.