Duplicating a table

The spot color table registered at factory shipping in the image controller cannot be adjusted and overwritten. When you want to adjust the spot color table registered at factory shipping, load the duplication of it which was made beforehand and adjust the duplication.

1. From the tree view of Spot Color Table Management screen, select Controller.

   The list appears according to the selection.

   • supplementary explanationFor details about how to connect another image controller, refer to Switch the Image Controller to Connect.

2. From the list, select the spot color table to copy.

   • supplementary explanationWhen you reload the information of the image controller connected currently, select File menu - Reload.

3. Click Copy.

   Displays the Copy screen.

   • supplementary explanationWhen a folder other than Controller is selected on the tree view, Copy is not available.

   • supplementary explanationYou can also click the File menu - Copy.

4. Enter Table Name and Memo.
   Up to 31 one-byte characters can be entered to Table Name. Up to 64 one-byte characters (32 two-byte characters) can be entered to Memo.

   • supplementary explanationYou can save the spot color table of the same name with those in the image controller.

5. Click OK.

   The duplication of the spot color table is generated in the image controller.

   • supplementary explanationThe priority of the duplicated spot color table becomes the top among the spot color tables with the same prefix (group). When you change the priority of the spot color table in the image controller, refer to Changing the priority.