Changing the Color Conversion Setting

Specify the Color Conversion setting to use as default for the Color Configuration you create.

  1. In the tree view on the Color Configuration Management screen, click a color configuration that is shown in black.

    The details are displayed on the right side of the screen.

  2. Click Setting in the Color Conversion Option Settings at the bottom of the detail information fields.

    Color Conversion Settings screen is displayed.

  3. Select the setting of Pure Black from Pure Black.

  4. To use gray replacement, select from Gray Replacement (RGB) and Gray Replacement (CMYK).

  5. To use black overprint, check Black Overprint.

  6. Select the setting of Composite Overprint from Composite Overprint.

  7. To use an embedded RGB profile, check Use Embedded RGB Profile.

    • supplementary explanationIt performs color conversion by using profiles that are embedded in objects in print data.
      Select it when you print by using a profile that you assign on an application (example: Adobe Photoshop).

  8. To use embedded CMYK profile, check Use Embedded CMYK Profile.

    • supplementary explanationIt performs color conversion by using profiles that are embedded in objects in print data.
      Select it when you print by using a profile that you assign on an application (example: Adobe Photoshop).

  9. To use output intent of PDF/X, select PDF/X output intent.

  10. To use spot color, check Spot Color.

  11. To use alternative colors, select a table in AlternativeColor Table.

  12. To use the RGB simulation, check RGB Simulation.

  13. To use tone curve adjustment, select an option from Tone Curve.

    • supplementary explanationWhen individual adjustment of tone curve is enabled, set Tone Curve (Image) and Tone Curve (Text/Graphic).

  14. If necessary, enter the description to Memo.

  15. Click OK and return to Color Configuration Management screen.

  16. Click Register on Color Configuration Management screen.

    • supplementary explanationWhen there is a Color Configuration with the same name, it is registered with another name automatically. In this case, the confirmation message appears.