RGB-CMYK Device Link Profile: Overview of Editing
This section describes how to edit the RGB-CMYK device link profile by launching Color Centro Profiler.
Color Centro Profiler enables the adjustment of the point color per object and the adjustment of the profile curve.
For details about the object, refer to Profile Set.
You can adjust a specified output color in Point Color Adjustment.
The difference from Alternative Color is whether the surrounding colors are affected.
- Alternative Color: This does not affect the surrounding colors
- Point Color Adjustment: This affects the surrounding colors
To adjust a specified output color only, use Overview of [Alternative Color Management] screen.
In Profile Curve Adjustment, you adjust the gradation of the entire image.
You adjust tone curves of device link profiles.
The wizard screen appears by launching Color Centro Profiler. Following the instructions of the screen, you can edit the RGB-CMYK device link profile.
The flow of the wizard is as follows;
The following buttons appear on the wizard screen. Use those as required.
Next: Click this button when you go to the next screen after completing the setting of the displayed current screen.
Back: Click this button when you back to the previous screen.
Cancel: Click this button when you cancel the operation.
Suspend the Operation: This button is displayed only on screens which allow for the suspension and restarting of operations. Click this button when you want to suspend your operation temporarily and restart thereafter. The setting you made can be saved to the file. For details about how to suspend and restart operation, refer to Suspend an Operation and Restart the Suspended Operation.