Specifying the value

Selection of an input color

When you adjust the existed alternative color setting, select the original color (input color) to which the alternative color can be set.

When you add the new alternative color setting to the existed alternative color table, add the new input color.

This section describes how to select the input color and how to add the new input color.

If the input color is K100%, on the printer driver, set Pure Black to OFF.
Printer Driver > Color Management > Other Settings > Pure Black

This section describes how to select the original color (input color) to which the alternative color can be set.

  1. Click RGB tab or CMYK tab on Alternative Color Management screen.

    The list of each tab is displayed.

    • supplementary explanationWhen you select the RGB input color, click RGB tab.

    • supplementary explanationWhen you select the CMYK input color, click CMYK tab.

  2. From the list, click the line of the alternative color (input color) which you adjust.

    The color which is displayed in Original of the selected line, is selected as the input color.

    • supplementary explanationWhen you adjust the selected input color, go to Input color.

    • supplementary explanationWhen you adjust the alternative color without adjustment of the input color, go to Output color.

    • supplementary explanationThe list displays the content of the alternative color table that is in the image controller currently connected.

    • supplementary explanationWhen you reload the information of the image controller connected currently, select File menu - Refresh. Executing Refresh discards the adjusted alternative color settings when the adjustment result has not been registered yet in the image controller. Register the settings before executing Refresh, as required. For details about the registration, refer to Updating an Alternative Color Table.

    • supplementary explanationThe current setting can be stored for the selected alternative color. When you want to create the new setting on base of the selected setting, make the duplication of it and adjust the duplication. For details about how to copy the alternative color and how to delete it, refer to Alternative Color Management.

Addition of an input color

  1. Click RGB tab or CMYK tab on Alternative Color Management screen.

    The list of each tab is displayed.

    • supplementary explanationWhen you add the RGB input color, click RGB tab.

    • supplementary explanationWhen you add the CMYK input color, click CMYK tab.

  2. Click New.

    One line is added to the top of the list.

    • supplementary explanationWhen you adjust the alternative color without adjustment of the input color, go to Output color.