Duplicating a Profile Set

You can make a duplication of the Profile Set in the image controller, to the image controller. The profile set saved on the Local computer or Network computer can be saved on another Local computer or Network computer upon naming it.

1. Click Execute on the Color Configuration Management screen.

   Color Centro Profiler screen appears.

2. From the tree view and the list of Management of the Existing Profile sets, select the Profile Set to copy.

   • supplementary explanationFor details about how to connect another image controller, refer to Switch the Image Controller to Connect.

   • supplementary explanationWhen you reload the information of the image controller connected currently, select View menu - Reload. Executing of reload discards the adjusted Profile Set when the Profile Set has not been registered yet in the image controller. Register the settings before executing of reload, as required. For details about the registration, refer to Editing and Registering a Color Configuration.

3. Click Copy.

   When you select the Profile Set in the image controller, Copy Profile Set screen appears.
   

   When a profile set saved on the Local computer or Network computer is selected, the Save As screen is displayed.

   • supplementary explanationWhen you select multiple profile sets, Copy is not available.

   • supplementary explanationSimilar operation can be done when you select Copy on the shortcut menu of the row.

4. Specify Profile Set Name (in the case of the image controller) or File Name (in the case of a Local computer or Network computer).

   • supplementary explanationYou cannot save the Profile Set of the same name with those in the image controller.

   • supplementary explanationWhen you copy to the image controller, enter the Profile Set Name. Up to 31 one-byte characters can be used.

5. Click OK (in the case of the image controller) or Save (in the case of a Local computer or Network computer).

   The duplication of the Profile Set is generated.

   • supplementary explanationWhen there is the Profile Set with the same name, Copy Profile Set screen appears again. In this case, specify another Profile Set name and click OK.

6. On Color Centro Profiler screen, from the File menu, select Exit.

   Color Configuration Management screen returns.