You can change the information of the saved CMYK target profile.
Click CMYK Target Profile on Profile Management screen.
supplementary explanationSimilar operation can be done by selecting, on the File menu, Profile Type - CMYK Target Profile.
From the tree view and the list, select the CMYK target profile to change the information.
supplementary explanationFor details about how to connect another image controller, refer to Switch the Image Controller to Connect.
supplementary explanationWhen you reload the information of the image controller connected currently, select File menu - Reload.
Click Change Table Information.
The Change Table Information screen is displayed.
supplementary explanationWhen you select the multiple CMYK target profiles, Change Table Information is not available.
supplementary explanationSimilar operation can be done when you select File menu - Change Table Information.
supplementary explanationIf the profile name is marked with an asterisk, you cannot change the profile's information.
If necessary, enter Saved Name and Memo.
Up to 31 one-byte characters can be entered to Saved Name. Up to 64 one-byte characters (32 two-byte characters) can be entered to Memo.
supplementary explanationHowever, you cannot change the information of the CMYK target profile which was registered at factory shipping.
Click OK.
The CMYK target profile information is changed.