Load Tone Curves

This section describes how to load the tone curve.

To adjust a tone curve pre-registered in the image controller, load it into Color Centro to make the adjustment.

After making the adjustment, you can register the adjusted tone curve in the image controller.

For details, refer to Management of Tone Curves.

1. Click Load Tone Curve on the Tone Curve Adjustment screen.

   Tone Curve Management screen appears.

   • supplementary explanationSimilar operation can be done when you select File menu - Tone Curve Management.

2. From the tree view, select the place to save the tone curve.

   The list appears according to the selection.

   • supplementary explanationFor details about how to connect another image controller, refer to Switch the Image Controller to Connect.

3. From the list, select the tone curve to load.

   • supplementary explanationWhen you reload the information of the image controller connected currently, select File menu - Reload.

4. Click Open.

   The Tone Curve Management screen is closed to return to the Tone Curve Adjustment screen.

   Selected tone curve is loaded and the settings appear to Tone Curve Adjustment screen.

   • supplementary explanationWhen you click Cancel, Tone Curve Management screen is closed to return to Tone Curve Adjustment screen.

   • supplementary explanationWhen you adjust the tone curve, go to Adjustment of Tone Curves: Brightness and Contrast.