HomeDescription of Setup Buttons (Administrator Settings)

Descriptions of Setup Buttons

Description of Setup Buttons (Administrator Settings)

Vertical Adjustment[Utility]

To display:
  • [Utility]
    • [Administrator Settings]
      • [System Settings]
        • [Expert Adjustment]
          • [Printer Adjustment]
            • [Vertical Adjustment]
Adjust the feed direction zoom ratio of paper types. For details on displaying this item, contact your service representative.

Vertical Punch (Z-Fold) Position Adjustment[Utility]

To display:
  • [Utility]
    • [Administrator Settings]
      • [System Settings]
        • [Expert Adjustment]
          • [Finisher Adjustment]
            • [Vertical Punch (Z-Fold) Position Adjustment]
If the positions of the punch holes on the paper are displaced vertically, use this option to adjust the punch hole positions.Copy after configuration, then repeat adjustments as required.
SettingsDescription
[Paper Size]
Select the size of paper subject to punch hole position adjustment.
[Adjust Value]
Enter an adjustment value between -5.0 and 5.0 mm by tapping [-] and [+].
  • [-]: Move the punch position downward.
  • [+]: Move the punch position upward.
[0.0 mm] is specified by default.
Tips
  • This item is available if the Z Folding Unit is installed in the optional Finisher FS-535.
  • Make adjustments while checking paper punched at a displaced position.
  • The value you set by selecting [All] in [Paper Size] will be added to the setting for each paper size.