HomeDescription of Setup Buttons

Descriptions of Setup Buttons

Description of Setup Buttons

OHP Interleave[Copy]

To display:
  • [Copy]
    • [Application]
      • [Tailoring]
        • [OHP Interleave]

When copying onto multiple transparencies, you can insert the specified paper between the transparencies. These sheets of paper prevent the transparencies from sticking together due to heat generated during copying or static electricity.

 

OHP Interleave

To display:
  • [Copy]
    • [Application]
      • [Tailoring]
        • [OHP Interleave]

When copying onto multiple transparencies, you can insert the specified paper between the transparencies. These sheets of paper prevent the transparencies from sticking together due to heat generated during copying or static electricity.

SettingsDescription
[ON]/[OFF]
Select [ON] to specify OHP Interleave.
[Interleave Paper]
Select the paper tray for the paper to be inserted between transparencies.
The paper size of the transparencies loaded on the Bypass Tray is displayed in [Transparency]. Be sure to use the same size for loaded transparencies and the paper to be inserted.
Tips
  • You can only specify [Black] for copying onto transparencies.
  • You can only specify 1 for the number of copies. The number value cannot be changed.
  • The finishing function cannot be changed.
Reference
  • Load transparencies into the Bypass Tray. For details on how to load transparencies, refer to Here.
NOTICE
  • Do not use a transparency that has been through the machine even once. Doing so may lead to reduced print quality, a paper jam, or damage to the machine. Even if a transparency has been discharged without being printed, it cannot be reused.

Original Settings[Scan/Fax]

To display:
  • [Scan/Fax]
    • [Application]
      • [No. of Originals]
        • [Original Settings]

Configure the setting so as to scan originals accurately according to the properties of the originals to be loaded.

 

Original Settings

To display:
  • [Scan/Fax]
    • [Application]
      • [No. of Originals]
        • [Original Settings]

Configure the setting so as to scan originals accurately according to the properties of the originals to be loaded.

SettingsDescription
[Original Setting]
Configure the setting so as to scan originals accurately according to the properties of the originals to be loaded.
  • [Mixed Original]: Even for an original with pages of different sizes, by using the ADF, you can scan data while detecting the size of each page. If the widths of the originals are the same, select [Same Width]. If the widths of the originals are different, select [Different Width].
  • [Thin Paper Original]: Reduces the transport speed of the original on the ADF to prevent the original from being caught when scanning an orig-inal that is thinner than plain paper.
  • [Z-Folded Original]: Even the original sizes of folded originals can be detected accurately.
  • [Long Original]: Select this option when loading a long original that is larger in the feeding direction than the full standard size (11 17 or A3).
[Despeckle]
Scan an original using the ADF while removing dust from the Slit Scan Glass.
It takes longer to finish scanning, compared to the normal operation.
[Blank Page Removal]
Blank pages contained in the original loaded into the ADF are skipped when the original is scanned.
Select this check box when scanning an original that contains blank pages. Any blank pages that are detected are not counted as original pages.
[Binding Position]
When scanning a 2-sided original, select the original binding position to prevent the binding positions being reversed between the front and rear faces.
  • [Auto]: The binding position is automatically set. A page margin position along the long side of the paper is selected if the original length is 11-11/16 inches (297 mm) or less. A page margin along the short side of the paper is selected if the original length exceeds 11-11/16 inches (297 mm).
  • [Left Bind]: Select this option when the binding position is set to the left of the original.
  • [Top Bind]: Select this option when the binding position is set to the top of the original.
[Original Direction]
Specify the orientation of the loaded original.
Related setting
  • If blank pages are not detected correctly although [Blank Page Removal] has been specified to scan an original, adjust the level to detect blank pages. For details, refer to Here.

Original Settings[Copy]

To display:
  • [Copy]
    • [Application]
      • [No. of Originals]
        • [Original Settings]

Set the options to scan originals correctly based on their properties.

 

Original Settings

To display:
  • [Copy]
    • [Application]
      • [No. of Originals]
        • [Original Settings]

Set the options to scan originals correctly based on their properties.

SettingsDescription
[Original Setting]
Set the options to scan originals correctly based on their properties.
  • [Mixed Original]: Even for an original containing pages of different sizes, by using the ADF, you can scan data while the size of each page is detected. If the originals have the same widths, select [Same Width]. If the originals have different widths, select [Different Width].
  • [Thin Paper Original]: Reduce the original feed speed of the ADF to prevent the original from getting caught.
  • [Z-Folded Original]: The size of the original - even folded originals - can be detected accurately.
  • [Booklet Original]: Scan a catalog with the staples removed as a 2-sided original, make a 2-sided copy, and staple the center of the paper in the same manner as the original catalog.
[Despeckle]
Scan originals using the ADF while removing dust on the Slit Scan Glass.
It takes longer to finish scanning, compared to the normal operation.
[Blank Page Removal]
Blank pages contained in the original loaded into the ADF are skipped when the original is scanned.
Select this check box when scanning an original which contains blank pages. Blank pages detected are not counted as original page.
[Binding Position]
When scanning a 2-sided original, select the original binding position to prevent the binding positions be reversed between the front and rear faces.
  • [Auto]: The binding position is automatically set. When the long side of the original is 11-11/16 inches (297 mm) or less, the binding position is set to the long side of the paper. When the long side of the original exceeds 11-11/16 inches (297 mm), the binding position is set to the short side of paper.
  • [Left Bind]: Select this option when the binding position is set to the left of the original.
  • [Right Bind]: Select this option when the binding position is set to the right of the original.
  • [Top Bind]: Select this option when the binding position is set to the top of the original.
[Original Size]
If the size of the original is not detected correctly, select a key indicating the size of the original to be scanned. If the machine cannot detect the size of irregular sized originals or photos, manually specify the size.
[Original Direction]
Specify the orientation of the loaded original.
Tips
  • To use [Booklet Original] in [Original Setting], the optional Finisher and Saddle Stitcher are required.
Related setting
  • In case blank pages are not detected correctly even though scanning has taken place with [Blank Page Removal] enabled, adjust the detection level for blank pages. For details, refer to Here.

Original Settings [Box]

Original Type[Scan/Fax]

To display:
  • [Scan/Fax]
    • [Application]
      • [Quality/Density]
        • [Original Type]

Select the appropriate image quality level for the original and scan at the optimal level of image quality.

 

Original Type

To display:
  • [Scan/Fax]
    • [Application]
      • [Quality/Density]
        • [Original Type]

Select the appropriate image quality level for the original and scan at the optimal level of image quality.

SettingsDescription
[Text]
Press this button to scan an original that consists primarily of text at the optimum level of image quality.
Sharpen the edges of text to improve legibility.
[Text/Photo Printed]
Press this button to scan an original containing of text and photos at the optimum level of image quality.
Sharpen the edges of text, and smoothen photos.
Select this option to scan printed originals such as brochures and catalogs.
[Text/Photo PhotoPaper]
Press this button to scan an original containing of text and photos at the optimum level of image quality.
Sharpen the edges of text, and smoothen photos.
Select this option to scan originals in that include photos printed on photographic paper.
[Photo Printed]
Press this button to scan an original consisting of only photos at the optimum image quality level. Select this option to scan printed originals such as brochures and catalogs.
[Photo PhotoPaper]
Press this button to scan an original consisting of only photos at the optimum image quality level. Select this option to scan originals printed on photographic paper.
[Dot Matrix Original]
Press this button to scan an original that consists primarily of thin or faint text at the optimum level of image quality.
Darken the text to improve legibility.
[Copied Paper]
Press this button to scan originals containing uniform density and that are printed on copier or printer, at the optimum level of image quality.

Original Type[Copy]

To display:
  • [Copy]
    • [Original Type]

Select the optimum settings for the original to copy it in the optimum image quality.

 

Original Type

To display:
  • [Copy]
    • [Original Type]

Select the optimum settings for the original to copy it in the optimum image quality.

SettingsDescription
[Text]
Copy originals primarily containing text at the optimum image quality level.
Sharpen the edges of text to improve legibility.
[Text/Photo Printed]
Copy the original, which consists of text and photos, at the optimum image quality level.
Sharpen the edges of text, and smoothen the photos.
Select this option to scan printed originals such as brochures and catalogs.
[Text/Photo PhotoPaper]
Copy the original, which consists of text and photos, at the optimum image quality level.
Sharpen the edges of text, and smoothen the photos.
Select this option for scanning originals in which photos are printed on photographic paper.
[Photo Printed ]
Press this button to copy an original consisting of only photos at the optimum image quality level.
Select this option to scan printed originals such as brochures and catalogs.
[Photo PhotoPaper]
Press this button to copy an original consisting of only photos at the optimum image quality level.
Select this option for scanning originals printed on photographic paper.
[Dot Matrix Original]
Copy an original, that primarily consists of text such as thin or faint characters, at the optimum image quality level.
Darken the text to improve legibility.
[Map]
Copy an origin that has a colored background such as a map or an image drawn with a pencil or containing thin colored lines, at the optimum image quality level.
A sharp copy image is produced.
[Copied Paper]
Copy an original, which has been output with an even density from the copier or printer, at the optimum image quality level.
[Recall Image Adjustment Program]
Call the image quality adjustment program. The registered content of program is applied.
For image adjustment program, you can register the settings of [Original Type], [Density], [Bkgd. Removal], [Text Enhancement], [Neg-/Pos. Reverse], [Background Color], [Color Adjust], and [Mirror Image]. For details on how to register, refer to Here.

Original Type [Box]

Other [Box]

Overlay[Copy]

To display:
  • [Copy]
    • [Application]
      • [Stamp/Composition]
        • [Overlay]

The original image scanned in the first page is overlaid on the originals scanned in the subsequent pages.

 

Overlay

To display:
  • [Copy]
    • [Application]
      • [Stamp/Composition]
        • [Overlay]

The original image scanned in the first page is overlaid on the originals scanned in the subsequent pages.

SettingsDescription
[ON]/[OFF]
Select [ON] to compose an overlay image.
[Pages]
Select the range of pages on which an overlay image is composed.
[Density]
If necessary, adjust the density of the overlay image to be composed.
[Original Size]
If the size of the original is not detected correctly, select a key indicating the size of the original to be scanned. If the machine cannot detect the size of irregular sized originals or photos, manually specify the size.
[Composition]
Select how to compose an overlay image.
  • [Transparent]: Print the overlay image on the original in a translucent tone.
  • [Background (Orig.)]: Print an overlay image at the front side of the original.
  • [Back]: Print an overlay image at the back side of the original.
[Color]
If necessary, select the print color of the overlay image to be composed.