Registering Copy Job Setting

Follow the procedure below to store the copy job setting.

• preconditionAvailable settings: Paper Setting, Original Setting, Zoom Setting, Color/Print Side, Quality Adjustment, Output Setting, Application

• preconditionStored job is given a job number (from 01 to 30) and alphabetical name.

• preconditionUp to 30 jobs can be registered.

1. Press the COPY tab to display the COPY screen.

2. Make copy selections, as desired.

3. Press Mode Memory on the control panel.

   The Mode Memory Mode screen is displayed.

4. Press Store.

   The screen to check the details is displayed.

5. Review the settings to be stored.

   • supplementary explanationDepending on the settings, right are displayed at the bottom of the screen. Press the keys to check the setting.

   • supplementary explanationIf any setting change is desired, press Cancel on the screen to check the details and then press Cancel on the Mode Memory Mode screen. The screen returns to the COPY screen. Make correction of the settings.

   

6. Press OK.

   The Job store mode screen is displayed.

7. Press the desired job key, then press OK.

   The Job Name Setting screen is displayed.

   • supplementary explanationA key without name indicates that no job is stored under that job number.

   • supplementary explanationA named key without a lock icon  has been stored with job settings but can be overwritten.

   • supplementary explanationThe key with the lock icon is locked and cannot be selected. To enable or disable the lock mode, select Lock/Delete Mode Memory - Mode Memory Mode. For details, refer to Copy Mode Memory.

   

8. Enter a job name, then press OK.

   • supplementary explanationUp to 8 two-byte characters or 16 one-byte characters can be entered for the job name.

   • supplementary explanationTo return to the Mode Memory Mode screen, press OK. Check that the job name has been correctly entered.

   • supplementary explanationText entry is described in Inputting Characters.

   • supplementary explanationMake sure that you enter a name for the job. You cannot return to the Mode Memory Mode screen even when pressing OK without entering a name for the job.

   

9. Press OK on the Mode Memory Mode screen.

   The screen returns to the COPY screen.