Overview of Copy
- Overview of Copy Function
- Available Operations for Copy Function
Copy Specifications (With Paper Feed Unit PF-711 mounted)
Copy Operations
- Basic Copy Procedure
- [COPY] Screen
- Positioning the Original
  - Positioning the Original in ADF
  - Positioning the Original on Original Glass
- Setting Print Quantity
  - Setting Print Quantity
  - Changing entered print quantity
- Stopping Job Currently in Process of Scanning/Printing
Copy Original Setting
- [Original Setting]: Setting the Original
- [Direction]: Setting Direction of Original
- [Separate Scan]: Handling Scanned Original as Single Job
Copy Image Setting
- [Quality Adjustment]: Adjusting the Quality of the Copied Image
- [Zoom] : Setting Copy Zoom
- [Color]: Selecting Color Mode
Copy Application Setting
- [Application]: Setting to Match Finishing
Copy Output Setting
- [Simplex/Duplex]: 1-Sided Copy and 2-Sided Copy Settings
- [Output Setting]: Output Paper Setting
Paper Setting
Finishing Settings Using the Mounted Optional Devices
Checking the finishing
Adjustment of this Machine
Useful Copy Functions
- Interrupt: Interrupting Copy Job
- Registering copy settings in the program
- Reserving a job setting
  - Reserving a job setting
  - Reserving Copy Jobs during Warm-up
- Continuing Job on Following Day
- Store Setting: Holding the Scanned Copy Job on this Machine or Saving it on the HDD
Adjusting the Finishing

About Perfect Binder PB-503

The machine with Perfect Binder PB-503 mounted automatically attaches a copied set with a cover paper to make a perfect-bound book, applying a dab of glue to the spine.

For details, refer to each of the following pages.

When Saddle Stitcher SD-513 is used together, the following functions are available.

Cover Fore-Edge Trimming
When ON is selected, the machine trims the cover by the amount automatically estimated from the following formula, in the range from 5 mm to 40.0 mm in 0.1 mm increments.
Trimming width = (Cover width) - (Body width 2) - (Spine width)
If the estimated amount exceeds 10 mm, the machine automatically trims the cover regardless of whether the trimming setting is determined.
Cover 2-Side Slitting
This function is available when Saddle Stitcher SD-513 equipped with Trimmer Unit TU-503 is mounted on this machine.
This function carries out 2-side slitting at the top for the cover that is loaded into a tray other than the cover tray of the perfect binder. The 2-side slitting is not available for the body.
The slitting amount can be specified between 8.0 mm and 26.0 mm in 0.1 mm increments.
The difference between the slitting amounts at the top is within 10.0 mm.
Crease
This function is available when Saddle Stitcher SD-513 equipped with Creaser Unit CR-101 is mounted on this machine.
Selecting (3) Spine makes two creases in the folded part on the spine cover.
Selecting (4) Gutter makes two creases in the gutter between the front and back covers to smoothly flip through pages in a binder. In this case, Back is only available for Crease.
Selecting (3) Spine + (4) Gutter makes two creases in each of the spine cover and gutter.