Hue

The hue adjustment varies each shade of red (R), yellow (Y), green (G), cyan (C), blue (B), and magenta (M) to the rotation direction of the color circle.

Original

Output

Hue

  1. Press the COPY tab to display the COPY screen.

  2. Press Quality Adj. on the COPY screen.

  3. Position the original.

    • supplementary explanationPrepare an original for adjusting the hue, and position it into the ADF or on the original glass.

  4. Make an adjustment for Hue on the Quality Adjustment screen.

    Use - and + on the right side of Hue to specify the desired adjustment level.

    Specify a negative level to make red closer to magenta, green closer to yellow, and blue closer to cyan; or, specify a positive level to make red closer to yellow, green closer to cyan, and blue closer to magenta.

    • supplementary explanationTo make the adjustment for Hue on the Hue screen, proceed to step 5.

    • supplementary explanationTo output a sample copy to check the adjustment result, proceed to step 6.

    • supplementary explanationTo complete the adjustment, proceed to step 7.

    • supplementary explanationIf you press Default Set on the Quality Adjustment screen, all adjustment items are returned to the standard level.

  5. Make the hue adjustment for red, green, and blue collectively on the Hue screen.

    • supplementary explanationPress Hue to display the Hue screen.

    Press - to specify a negative adjustment level to make red closer to magenta, green closer to yellow, and blue closer to cyan.

    Press + to specify a positive adjustment level to make red closer to yellow, green closer to cyan, and blue closer to magenta.

    • supplementary explanationTo resume the standard level, select 0.

    • supplementary explanationTo resume the standard level and return to the Quality Adjustment screen, press Default Set.

    • supplementary explanationTo output a sample copy to check the adjustment result, proceed to step 6.

    • supplementary explanationTo complete the adjustment, proceed to step 7.

    • supplementary explanationIf you press Default Set on the Hue screen, adjustment items are returned to the standard level.

  6. Output a sample copy.

    After making the desired adjustment, press Adj.Proof Copy on the Quality Adjustment screen, Adj.Proof Copy on the Hue screen, or Proof Copy on the control panel. Check the adjustment result with output image.

    • supplementary explanationRepeat steps from 3 to 6 until the desired result is obtained.

  7. Press Close on the Quality Adjustment screen.

    The screen returns to the COPY screen. The Hue indication can be found under Quality Adj. on the COPY screen.