Brightness

Adjust the brightness of copy image.

Original

Output

Brightness

  1. Press the COPY tab to display the COPY screen.

  2. Press Quality Adj. on the COPY screen.

  3. Position the original.

    • supplementary explanationPrepare an original for adjusting the brightness, and position it into the ADF or on the original glass.

  4. Make an adjustment for Brightness on the Quality Adjustment screen.

    Use - and + on the right side of Brightness to specify the desired adjustment level.

    Specify a negative level to make the copy image darker, or a positive level to make it brighter.

    • supplementary explanationTo make the adjustment for Brightness on the Brightness screen, proceed to step 5.

    • supplementary explanationTo output a sample copy to check the adjustment result, proceed to step 6.

    • supplementary explanationTo complete the adjustment, proceed to step 7.

    • supplementary explanationIf you press Default Set on the Quality Adjustment screen, all adjustment items are returned to the standard level.

  5. Make an adjustment for Brightness on the Brightness screen.

    Press Brightness to display the Brightness screen.

    Select one from -1 to -4 to make the copy image darker.

    Select one from 1 to 4 to make the copy image brighter.

    • supplementary explanationTo resume the standard level, select 0.

    • supplementary explanationTo resume the standard level and return to the Quality Adjustment screen, press Default Set.

    • supplementary explanationTo output a sample copy to check the adjustment result, proceed to step 6.

    • supplementary explanationTo complete the adjustment, press OK to return to the Quality Adjustment screen and proceed to step 7.

  6. Output a sample copy.

    After making the desired adjustment, press Adj.Proof Copy on the Quality Adjustment screen, Adj.Proof Copy on the Brightness screen, or Proof Copy on the control panel. Check the adjustment result with output image.

    • supplementary explanationRepeat steps from 3 to 6 until the desired result is obtained.

  7. Press Close on the Quality Adjustment screen.

    The screen returns to the COPY screen. The Brightness indication can be found under Quality Adj. on the COPY screen.