Overview of Copy
- Overview of Copy Function
- Available Operations for Copy Function
Copy Specifications (With Paper Feed Unit PF-711 mounted)
Copy Operations
- Basic Copy Procedure
- [COPY] Screen
- Positioning the Original
  - Positioning the Original in ADF
  - Positioning the Original on Original Glass
- Setting Print Quantity
  - Setting Print Quantity
  - Changing entered print quantity
- Stopping Job Currently in Process of Scanning/Printing
Copy Original Setting
- [Original Setting]: Setting the Original
- [Direction]: Setting Direction of Original
- [Separate Scan]: Handling Scanned Original as Single Job
Copy Image Setting
- [Quality Adjustment]: Adjusting the Quality of the Copied Image
- [Zoom] : Setting Copy Zoom
- [Color]: Selecting Color Mode
Copy Application Setting
- [Application]: Setting to Match Finishing
Copy Output Setting
- [Simplex/Duplex]: 1-Sided Copy and 2-Sided Copy Settings
- [Output Setting]: Output Paper Setting
Paper Setting
Finishing Settings Using the Mounted Optional Devices
Checking the finishing
Adjustment of this Machine
Useful Copy Functions
- Interrupt: Interrupting Copy Job
- Registering copy settings in the program
- Reserving a job setting
  - Reserving a job setting
  - Reserving Copy Jobs during Warm-up
- Continuing Job on Following Day
- Store Setting: Holding the Scanned Copy Job on this Machine or Saving it on the HDD
Adjusting the Finishing

Punching File Holes in Copies: Punch

Set the Punch mode to punch file holes in printed sheets. Follow the procedure below to select the paper size (A4 long edge feed, 8.5 11 long edge feed) and punch position. To select the punch hole type, change the die set to the desired one.

Tips

For detailed specifications of Multi Punch GP-501, refer to Multi Punch GP-501.

Available paper sizes are A4 long edge feed or 8.5 11 long edge feed only. A4 short edge feed, 8.5 11 short edge feed cannot be used for this function.
A power switch is provided on the multi punch. Be sure to turn it on before turning on the main power switch and sub power switch of the main body.
The die set model currently mounted on the multi punch cannot be checked from the control panel. If required, open the front door of the multi punch to check it before the operation.

Position the original.
Press the COPY tab to display the COPY screen.
Press Output Setting.
The Output Setting screen will be displayed.
Press Punch.
The Punch screen will be displayed.
Select the desired punch position key provided under Multi Punch.
Press OK.
- supplementary explanationTo restore the previous setting, press Cancel.
- supplementary explanationTo disable the function while keeping the current setting, press Function OFF.
The Output Setting screen will be restored.
Press OK on the Output Setting screen to return to the COPY screen.
An icon representing specified output mode will be displayed under Output Setting on the COPY screen.