The Paper Setting offers two types of usage depending on what the setting is intended for.
One is the Paper Setting that allows you to set paper conditions to a paper tray.
The other is the Paper Setting that allows you to register paper conditions according to paper to be used.
This section describes how to make the Paper Setting for a paper tray. It also describes how to register set paper conditions.
While a job is running, you can change Paper Setting for the trays that are not used in the job. However, the paper conditions cannot be changed when the key is dimmed.
For details about the Paper Setting in which paper conditions are registered for the paper to be used, refer to [Paper Setting]: [Paper Profile Setting].
Registered paper conditions can be imported and exported using an external USB flash drive. For details, refer to [Paper Setting]: [Paper Profile Setting].
The Paper Setting can be made for the following trays:
Trays of Paper Feed Unit PF-707m (Tray 1 to Tray 9)
Trays of Paper Feed Unit PF-711 (Tray 1 to Tray 3)
Upper tray/lower tray of the post inserter of Folding Unit FD-503 (PI 1, PI 2)
Upper tray / Lower tray (PI 1, PI 2) of Post Inserter PI-502 mounted on Finisher FS-532
Cover tray of Perfect Binder PB-503 (PB)
Paper Setting for the tray to be used consists of the following paper conditions that can be specified as desired. Depending on the paper setting, the key for the options may be dimmed and cannot be selected.
Setting item | Description | Setting options |
---|---|---|
Paper Type | The following seven paper types are provided according to the plainness of paper. For details about Paper Setting, refer to Paper types. | Plain, Fine, Color Specific, Coated-GL, Coated-ML, Coated-GO, Coated-MO |
Profile Name | No entry can be made in setting the paper conditions for the tray to be used. Enter the paper profile name when you register the paper conditions specified for a tray. | Up to 50 one-byte characters (25 two-byte characters) can be entered for the name. |
Paper Size | Selecting Standard automatically detects the standard size of paper loaded in the selected tray. Selecting Custom allows you to enter the desired dimensions from the screen. This setting can also be made by recalling a custom size previously registered. To specify Tab Paper, select either A4Tlong edge feed or 8.5 11Tlong edge feed and specify the number of tabs. | Detectable standard sizes vary depending on the paper tray. Custom: Widthwise 100.0 mm*1 to 330.2 mm, Lengthwise 139.7 mm to 487.7 mm / Widthwise 3.94"*1 to 13.00", Lengthwise 5.50" to 19.20" for tray 1 to tray 9 (Paper Feed Unit PF-707m or Paper Feed Unit PF-711) Widthwise 182.0 mm to 331.0 mm, Lengthwise 139.0 mm to 483.0 mm / Widthwise 7.17" to 13.03", Lengthwise 5.47" to 19.02" for the post inserter tray of Folding Unit FD-503 Widthwise 182.0 mm to 331.0 mm, Lengthwise 139.0 mm to 297.0 mm / Widthwise 7.17" to 13.03", Lengthwise 5.47" to 11.69" for Post Inserter PI-502 (upper tray) mounted on Finisher FS-532 Widthwise 182.0 mm to 331.0 mm, Lengthwise 139.0 mm to 488.0 mm / Widthwise 7.17" to 13.03", Lengthwise 5.47" to 19.21" for Post Inserter PI-502 (lower tray) mounted on Finisher FS-532 Widthwise 139.0 mm to 307.0 mm, Lengthwise 279.0 mm to 472.0 mm / Widthwise 5.24" to 12.09", Lengthwise 10.98" to 18.58" for the setting of PB tray of Perfect Binder PB-503 Up to 20 custom sizes can be registered and recalled. Tab Paper: A4T long edge feed, 8.5 11T long edge feed (number of tabs: 1 to 15) |
Weight | Select the paper weight. Four types of coated paper become available when the weight over 81 g/m2 / 22 lb Bond is selected. The unit of weight can be switched. The unit used to register the condition is also used to display that condition on the MACHINE screen and the COPY screen when called. | Weight: 52-61 g/m2 / 14-15 lb Bond 62-74 g/m2 / 16-19 lb Bond 75-80 g/m2 / 20-21 lb Bond 81-91 g/m2 / 22-24 lb Bond 92-105 g/m2 / 25-28 lb Bond 106-135 g/m2 / 29-36 lb Bond 136-176 g/m2 / 37-47 lb Bond 177-216 g/m2 / 48-57 lb Bond 217-256 g/m2 / 58-68 lb Bond 257-300 g/m2 / 69-81 lb Bond 301-350 g/m2 / 82-93 lb Bond 351-400 g/m2 / 94-106 lb Bond Change Unit: g/m2, Duodecimo-kg, Octavo-kg, A Book-kg, Available paper weight varies with each tray. Paper Feed Unit PF-707m or Paper Feed Unit PF-711: 52 g/m2 to 400 g/m2 / 14 lb Bond to 106 lb Bond*2 Perfect Binder PB-503 PB tray: 81 g/m2 to 216 g/m2 / 22 lb Bond to 57 lb Bond Upper tray/lower tray of Folding Unit FD-503 post inserter: 52 g/m2 to 300 g/m2 / 14 lb Bond to 81 lb Bond Upper tray/lower tray of Post Inserter PI-502: 52 g/m2 to 300 g/m2 / 14 lb Bond to 81 lb Bond Speed Setting: High, Middle, Low (Middle is available only in ineo+ 6100. ) |
Colored Paper | Specify the color of paper. This setting easily gives the color information of paper loaded in the tray. | White, Blue, Goldenrod, Gray, Green, Ivory, Orange, Pink, Red, Yellow, Cream, Others, User Color |
Punch | Specify whether or not the paper is punched. The paper specified as punched cannot be punched even if Punch is selected in Output Setting. | Pre-Punched, No Hole-Punch |
Both Sides Adj. | Adjusts Zoom ratios (Vertical, Horizontal), Image Shift amounts (Up/Down, Right/Left), and Rotate/Skew (rotation adjustment or distortion adjustment) for both Front and Back pages in order to align the images printed on front and back pages in 2-sided printing. Also, Gap or Chart Adjustment can be used for adjustment. If Integrated Color Care Unit IQ-501 is installed on the machine, AutoMeasure is displayed. If Periodical Adjustment is set to ON in AutoMeasure, Both Sides Adjust is automatically performed at the specified intervals. It is advisable to perform Both Sides Adjust for every paper to be used, as the shrinkage ratio differs according to the paper type, paper brand, or difference in temperature of storage location. It is possible to disable the horizontal zoom setting for the back page in Common Setting of the administrator setting. | Vertical Zoom: Front/Back -1.00 to +1.00 (1 step = 0.01%) Horizontal Zoom: Front -1.00 to +1.00 (1 step = 0.01%), Back -0.80 to +0.20 (1 step = 0.01%) Image ShiftUp/Down: Front/Back -10.0 mm to +10.0 mm (1 step = 0.1 mm) Image ShiftRight/Left: Front/Back -3.0 mm to +3.0 mm (1 step = 0.1 mm) Rotate: Front/Back -1.00 to +1.00 (1 step = 0.01%) Skew (Distortion adjustment): Front/Back -1.00 to +1.00 (1 step = 0.01%) Periodical Adjustment: ON or OFF |
RU Curl Adj. | Corrects the curl (arc-like distortion) of output paper. Also, switching ON and OFF for Humidifier Setting is available if Relay Unit RU-511 is equipped with Humidifier HM-101. | Curl Adjustment: +2, +1.5, +1, +0.5, 0, -0.5, -1, -1.5, -2, OFF Humidifier Set.: ON, OFF |
Air Assist | Use this function to blow air to paper in order to prevent feeding multiple sheets or paper jam, which is likely to occur depending on the paper type. | When Paper Feed Unit PF-707m or Paper Feed Unit PF-711 is mounted: When Perfect Binder PB-503 is mounted: |
Thickness | The machine mounted with Image Controller IC-604 provides Thickness on the screen, and selecting Specify allows the machine to estimate the remaining amount of paper in the tray with greater accuracy. | Not Specify, Specify Adjustment Range: 0.050 mm to 0.500 mm |
Expert Adj. | Sets the transfer, separation, or fusing process and other advanced adjustments. For details about the Mis-centering Detect JAM setting, refer to [Print Job JAM Setting]. Expert Adjustment is not displayed by default. Contact your service representative. | 2nd Transfer Output Adj. (Front): -50 to +50 2nd Transfer Output Adj. (Back): -50 to +50 2nd Transfer-Lead Edge (Front): -50 to +50 2nd Transfer-Lead Edge (Back): -50 to +50 2nd Transfer-Rear Edge (Front): -50 to +50 2nd Transfer-Rear Edge (Back): -50 to +50 Separation AC(Front): -50 to +50 Separation AC(Back): -50 to +50 Separation DC(Front): -30 to +30 Separation DC(Back): -30 to +30 Fus. T-Belt Center Temp. (Idle): -20 to +20 Fus. T-Belt Center Temp. (Print): -20 to +20 Fus. T-Belt Edge Temp. (Idle): -20 to +20 Fus. T-Belt Edge Temp. (Print): -20 to +20 L-Fus. Press Roller Center (Idle): -20 to +20 L-Fus. Press Roller Center (Print): -20 to +20 Lead Edge Erase Quantity: 0 to +200 Rear Edge Erase Quantity: 0 to +200 Registration Loop (Front): -99 to +99 Registration Loop (Back): -99 to +99 IQ Transport Roller Speed Adj.: Fusing Speed (Front Side): -200 to +200 Fusing Speed (Back Side Offset): -200 to +200 Registration Roller Speed: -10 to +10 Pre-regist. Loop Adj.(Front): -99 to +99 Toner Amount Save: ON, OFF Dens. Adj. Per Tray (YMC): 0 (Normal), +1, +2, +3 (Max) Dens. Adj. Per Tray (K): 0 (Normal), +1, +2, +3(Max) Double Feed Detection: Detect, Not Detect Mis-centering Detect JAM: Detect, Not Detect Int. Transfer Separation: Auto, ON, OFF Thick BK Mode: ON, OFF Feed Correction: ON, OFF PFU Paper Float Timing: Normal, Delay Lower Fusing Roller Cooling Fan Air Level: Standard, Weak, OFF Fusing Air Separation Air Level Setting: Weak (1) to Strong (7), Auto PFU Suction Air Level Setting: Weak (1) to Strong (9), Auto (9) Output Paper Separation Setting: ON(Coated), ON(Uncoated), Manual, OFF, Offset Value (-50 to +100) |
Color Density | This setting is enabled when ON is selected for Use Color Density Control, which is accessed from the Adjustment Menu screen, selecting Color Density Control - Basic Settings. | Each Paper Type Color Adj.Data: Default Adj. Data, Registered Adj. Data, OFF |
*1: Minimum size available only for the trays of the 1st unit when the machine is mounted with more than one paper feeder unit. The minimum size for the 2nd and 3rd units is 139.7 mm / 5.5".
*2: 351 g/m2 to 400 g/m2 or 94 lb Bond to 106 lb Bond is available only for the lower tray in the 1st unit. The standard size is available only for SRA3short edge feed, A3short edge feed, 13 19short edge feed, 12 18short edge feed, and 11 17short edge feed. The custom size is avail-able only for widthwise: 279.4 mm to 330.2 mm / 11.00" to 13.00” and lengthwise: 420 mm to 487.7 mm / 16.54" to 19.20".
For details about Both Sides Adj., refer to Overview of Both Sides Adjustment.
For details about RU Curl Adjustment, refer to [Curl Adjustment].
For details about Color Density Control, refer to Overview of Color Density Control.
When Paper Type and Weight are set as described in the table below, the machine displays To avoid JAM occurrence on the Change Individual Set screen in the Paper Setting screen for avoiding JAM (paper jam).
For displaying To avoid JAM occurrence, contact your service representative.
Paper Type | Weight |
---|---|
Plain, Fine, Color Specific | 52-61 g/m2 / 14-15 lb Bond |
62-74 g/m2 / 16-19 lb Bond | |
75-80 g/m2 / 20-21 lb Bond | |
Coated-GL, Coated-ML, Coated-GO, Coated-MO | 81-91 g/m2 / 22-24 lb Bond |
92-105 g/m2 / 25-28 lb Bond | |
106-135 g/m2 / 29-36 lb Bond |