- Home
- Menu
× Menu Useful Software If you have a problem…
- FAQ
- Troubleshooting
Menu
Copy
- Overview of Copy
- Copy Specifications (With Paper Feed Unit PF-711 mounted)
- Copy Operations
- Basic Copy Procedure
- [COPY] Screen
- Positioning the Original
- Setting Print Quantity
- Stopping Job Currently in Process of Scanning/Printing
- Copy Original Setting
- Copy Image Setting
- [Quality Adjustment]: Adjusting the Quality of the Copied Image
- [Zoom] : Setting Copy Zoom
- [Color]: Selecting Color Mode
- Copy Application Setting
- [Application]: Setting to Match Finishing
- Overview of Application
- How to set application
- Display under [Application] on the [COPY] Screen
- [Insert Sheet]: Adding a Front Cover or Insert Paper
- [Combine]: Copying Fixed Number of Pages onto One Sheet
- [Booklet]: Copying as Booklet
- [Adhesive Binding]: Making Copies in the Order of Adhesive Binding
- [Book Copy]: Copying Left and Right Pages of a Two Page Spread Original Separately
- [No Image Area Erase]: Erasing the Non-Image Area
- [Image Repeat]: Repeatedly Copying One Image onto One Paper
- [Frame Center Erase]: Eliminating Black Copy Mark around Border and Center of Book
- [Image Centering]: Copying the Document Area onto the Center of Paper
- [Page Margin]: Adjusting Copy Image Position
- [Stamp]: Copying with Additional Information Printed
- [180 Deg. Rotation]: Rotates the print side of output paper by 180 degrees to output data.
- [Application]: Setting to Match Finishing
- Copy Output Setting
- [Simplex/Duplex]: 1-Sided Copy and 2-Sided Copy Settings
- [Output Setting]: Output Paper Setting
- Paper Setting
- Finishing Settings Using the Mounted Optional Devices
- Using Output Tray OT-510
- Using Saddle Stitcher SD-506
- Using Saddle Stitcher SD-513
- Using Folding Unit FD-503
- Using Perfect Binder PB-503
- Using Large Capacity Stacker LS-506
- Using Finisher FS-532
- Output to Tray
- Sorting Copies to Primary (Main) Tray
- Sorting Copies to Secondary (Sub) Tray
- Stapling Copies
- Creating Half-Fold Booklet
- Tri-Fold Print
- Punching File Holes in Copies
- Using Functions Manually
- Disposing Punch Waste
- Taking Out Sheets From Folder Tray
- Taking Out Printed Sheets from Tray
- Taking Out Printed Sheets from the Primary (Main) Tray Suspended Automatically
- To Suspend the Output Job
- Taking Out Printed Sheets From the Secondary (Sub) Tray Suspended Automatically
- Taking Out Printed Sheets from the Folder Tray Suspended Automatically
- Canceling a Suspended Job
- Using Multi Punch GP-501
- Using Auto Ring Binder GP-502
- Checking the finishing
- Adjustment of this Machine
- Useful Copy Functions
- Interrupt: Interrupting Copy Job
- Registering copy settings in the program
- Reserving a job setting
- Continuing Job on Following Day
- Store Setting: Holding the Scanned Copy Job on this Machine or Saving it on the HDD
- Adjusting the Finishing
To Prevent Paper in the Stacker Tray from Collapsing
Remove the paper stopper from the carriage.
Mount the paper stopper on the paper holder.
supplementary explanationFit the two projections of paper stopper to the paper holder, then raise the other side as illustrated.
Hold the paper using the paper stopper.
supplementary explanationTurn the paper stopper to the paper.
NOTICE
Do not push it too strong. Otherwise, output sheets may be torn or wrinkled.
supplementary explanationPush down the paper stopper.
Remove the paper stopper from the paper holder.
supplementary explanationPull up the paper stopper as illustrated, then turn it toward the handle of the carriage to remove the stopper from the paper holder.
Return the paper stopper to its original position.
NOTICE
Return the paper stopper properly. Otherwise, the large capacity stacker door may not be closed.