Paper Length Adjustment

Adjust the position of the exit guides in the paper feed direction of the Relay Unit RU-510. If any punch holes are misaligned in the paper feed direction, make this adjustment.

Objects of Adjustment: Offset for All Size

  1. Press Adjustment on the MACHINE screen to display the Adjustment Menu screen.

  2. Press Finisher Adjustment, Relay Stacker Adjustment, and Paper Length Adjustment in sequence.

  3. Press Print Mode.

  4. Load A4 paper in a tray, and select that tray.

  5. Set the print quantity to 10, then press Start on the control panel.

    A punched sample pattern is printed.

  6. Check for any misalignment or inconsistency of punch holes in the paper feed direction.

  7. Press Exit PrintMode to return to the Paper Length Adjustment screen.

  8. If any adjustment is required, use the touch panel keypad to enter the set value.

    • supplementary explanationAdjustment Range: -50 (To reduce the dispersion) to +50 (To reduce the tilts) (1 step = 0.1 mm)

    • supplementary explanationUse +/- to specify the value to be positive or negative.

  9. Press Set to change the setting with the Current Data.

  10. Repeat steps 3 to 9 until the desired result is obtained.

  11. Press Return.

    The screen returns to the Relay Stacker Adjustment Menu screen.