Cover Up/Down CD Width Adj.

Adjust the vertical side using the Perfect Binder PB-503 to reduce misalignment and skew of the body pages and cover paper.

Objects of Adjustment: Perfect Binder Tray, Except PB Tray

  1. Press Adjustment on the MACHINE screen to display the Adjustment Menu screen.

  2. Press Finisher Adjustment, Perfect Binder Adjustment, and Cover Up/Down CD Width Adj. in sequence.

  3. Load cover paper in either Perfect Binder Cover Tray or any other tray.

  4. Load paper for body sets in the desired tray.

  5. Select either Perfect Binder Tray or Except PB Tray for the tray loaded with covers.

  6. Press Print Mode.

  7. Select the tray loaded with paper for body sets.

  8. Press Start on the control panel.

    A sample pattern of perfect-bound book is printed.

  9. Check that the horizontal scanning position of body set matches with that of the cover paper.

  10. If any adjustment is required, press Exit PrintMode to return to the Cover Up/Down CD Width Adjustment screen.

  11. Use the touch panel keypad to enter the set value.

    • supplementary explanationUse +/- to specify the value to be positive or negative.

    • supplementary explanationPress Set to change the Current Value.

    • supplementary explanationAdjustment Range: -20 (To reduce the distortion) to +20 (To reduce the misalignment) (1 step = 0.1mm)

  12. Repeat steps 6 to 11 until the desired result is obtained.

  13. Press Return.

    The screen returns to the Perfect Binder Adjustment Menu screen.