Parallel Trimming Adjustment

Adjust the levelness between the trimming line and cut edge in Saddle Stitcher SD-513.

Objects of Adjustment: Front, rear

NOTICE

  • This adjustment is available only when Saddle Stitcher SD-513 is equipped with Folding Unit FD-504.

  1. Press Adjustment on the MACHINE screen to display the Adjustment Menu screen.

  2. Press Finisher Adjustment, Saddle Stitcher Adjustment, and Parallel Trimming Adjustment in sequence.

  3. Select Front or Rear.

  4. Press Print Mode.

  5. Load A3 short edge feed paper into any tray, then select that tray.

  6. Press Start on the control panel.

    A sample pattern will be output.

  7. Measure levelness a of the trimming edge.

    Allowance: a = 4.0 mm or less (when 50 sheets are folded and stapled in Fold & Staple)

  8. If any adjustment is required, press Exit PrintMode to return to the Parallel Trimming Adjustment screen.

  9. Use the touch panel keypad to enter the set value.

    • supplementary explanationPress Set to change the Current Value.

    • supplementary explanationAdjustment Range: -0 (To narrow) to +30 (To widen) (1 step = 0.1 mm)

  10. Repeat steps 4 to 9 until the desired result is obtained.

  11. Press Return.

    The screen returns to the Saddle Stitcher Adjustment Menu screen.