Cover Lead Edge Adj.
Adjust the lead edge position of the left-hand cover paper determined with reference to body pages using Perfect Binder PB-503. The sizes referred to in this section are those of bodies corresponding to cover sizes.
Objects of Adjustment: Offset for All Size, A4 long edge feed, B5 long edge feed, A5 long edge feed, 8.5 11 long edge feed, 16K long edge feed, A5 short edge feed, 5.5 8.5 short edge feed, Custom (220 to 379 mm), Custom (148 to 219 mm)
NOTICE
If a numeric value is specified for Offset for All Size, it is applied to all paper sizes. With a specific paper size selected,the set value becomes the sum of the entered value and the value previously specified for Offset for All Size.
Press Adjustment on the MACHINE screen to display the Adjustment Menu screen.
Press Finisher Adjustment, Perfect Binder Adjustment, and Cover Lead Edge Adj. in sequence.
Load cover paper in either Perfect Binder Cover Tray or any other tray.
Load paper for body sets in the desired tray.
Select either PB Tray or Except PB Tray.
Select the size to be adjusted using down or up.
Press Print Mode.
Select the tray loaded with paper for body sets.
Press Start on the control panel.
A sample pattern of perfect-bound book is printed.
Check that the edge of the left cover paper extends out of the body set by the desired amount.
[1] Left cover paper [2] Right cover paper [3] Length differential [4] Edge of the left cover paper [5] Body pages
If any adjustment is required, press Exit PrintMode to return to the Cover Lead Edge Adjustment screen.
Use the touch panel keypad to enter the set value.
supplementary explanationUse +/- to specify the value to be positive or negative.
supplementary explanationPress Set to change the Current Value.
supplementary explanationAdjustment Range: -128 (To move closer to the body) to +127 (To move further from the body) (1 step =0.1 mm)
Repeat steps 7 to 12 until the desired result is obtained.
Press Return.
The screen returns to the Perfect Binder Adjustment Menu screen.