Paper Width Adjustment
Adjust the position of the exit guides in the crosswise direction of the Relay Unit RU-510. If any punch holes are misaligned in the crosswise direction, make this adjustment.
Objects of Adjustment: Offset for All Size
Press Adjustment on the MACHINE screen to display the Adjustment Menu screen.
Press Finisher Adjustment, Relay Stacker Adjustment, and Paper Width Adjustment in sequence.
Press Print Mode.
Load A4 paper in a tray, and select that tray.
Set the print quantity to 10, then press Start on the control panel.
A punched sample pattern is printed.
Check for any misalignment or inconsistency of punch holes in the crosswise direction.
Press Exit PrintMode.
The screen returns to the Paper Width Adjustment screen.
If any adjustment is required, use the touch panel keypad to enter the set value.
supplementary explanationAdjustment Range: -20 (To reduce the randomness) to +20 (To reduce the tilts) (1 step = 0.1 mm)
supplementary explanationUse +/- to specify the value to be positive or negative.
Press Set to change the setting with the Current Data.
Repeat steps 3 to 9 until the desired result is obtained.
Press Return.
The screen returns to the Relay Stacker Adjustment Menu screen.