Automatically adjust the position to start scanning on the ADF and the image position in crosswise direction.
Objects of Adjustment: Restart Timing (Front), Restart Timing (Back), Centering (Front), Centering (Back)
Adjust the scanning start position after you have completed [Adjustment] - [ADF Adjustment]-[FD-Mag. Adjustment]. Adjust the image position in crosswise direction after completing [Adjustment] - [Machine Adjustment] - [Printer Adjustment] - [Centering Adjustment].
Press [Adjustment] on the [MACHINE] screen to display the [Adjustment Menu] screen.
Press [ADF Adjustment] and [ADF Orig. Stop Pos. Auto] in sequence.
Press any of [Restart Timing(Front)], [Restart Timing(Back)], [Centering(Front)], and [Centering(Back)] buttons.
All items must be adjusted.
Place the test chart on the ADF tray, and press [Start].
If you selected [Restart Timing(Front)] or [Centering(Front)] in step 3, face the test chart surface upward and place it in the ADF tray.
If you selected [Restart Timing(Back)] or [Centering(Back)] in step 3, face the test chart surface downward and place it in the ADF tray.
Automatic adjustment is performed, and its result is displayed.
If it ends successfully, [Adjustment Result] indicates [OK]. If it ends abnormally, [NG] is displayed. Adjust it using the [ADF Original Stop Pos. Adj.] function.
[Skew Level] is displayed only when you have selected the [Restart Timing(Front)] in step 3.
Make sure that the adjustment result is [OK], and press [Set].
The [Position Adj. (mm)] value is reflected on [Current Data].
Press [Return].
The screen returns to the [ADF Adjustment Menu] screen.