Home Settings and AdjustmentsSpine Corner Forming Pos. Adj.: Adjusting the Form of Cover Sheets

Spine Corner Forming Pos. Adj.: Adjusting the Form of Cover Sheets

Adjust the cover paper using Perfect Binder PB-503.

Objects of Adjustment: Up/Down Forward Adj. (Front), Up/Down Rear Adj. (Rear)

  1. Press [Adjustment] on the [MACHINE] screen to display the [Adjustment Menu] screen.

  2. Press [Finisher Adjustment], [Perfect Binder Adjustment], and [Spine Corner Forming Pos.] in sequence.

  3. Load cover paper in either Perfect Binder Cover Tray or any other tray.

  4. Load paper for body sets in the desired tray.

  5. Press [Print Mode].

  6. Select the tray loaded with paper for body sets.

  7. Press Start on the control panel.

    A sample pattern of perfect-bound book is printed.

  8. Check that the spine corner of the cover paper is formed uniformly against the horizontal scanning direction.

  9. If any adjustment is required, press [Exit PrintMode] to return to the [Spine Corner Forming Pos.] screen.

  10. Select either [Up/Down Forward Adj.] or [Up/Down Rear Adj.].

  11. Use the touch panel keypad to enter the set value.

    • Use [+/-] to specify the value to be positive or negative.

    • Press [Set] to change the current value.

    • Adjustment Range: -128 ([-] [To convex]) to +127 ([+] [To concave]) (1 step = 0.1 mm)

  12. Repeat steps 5 to 11 until the desired result is obtained.

  13. Press [Return].

    The screen returns to the [Perfect Binder Adjustment Menu] screen.