Home Settings and AdjustmentsCover Trimming Adjustment: Adjusting the Trimming Width of the Right-Hand Cover Sheet

Cover Trimming Adjustment: Adjusting the Trimming Width of the Right-Hand Cover Sheet

Adjust the trimming width of the right-hand cover paper determined by Perfect Binder PB-503.

Objects of Adjustment: Perfect Binder Tray, Except PB Tray

  • Make this adjustment after completing [Perfect Binder Adjustment] - [Cover Lead Edge Adj.].

  1. Press [Adjustment] on the [MACHINE] screen to display the [Adjustment Menu] screen.

  2. Press [Finisher Adjustment], [Perfect Binder Adjustment], and [Cover Trimming Adjustment] in sequence.

  3. Load cover paper in either Perfect Binder Cover Tray or any other tray.

  4. Load paper for body sets in the desired tray.

  5. Select either [Perfect Binder Tray] or [Except PB Tray] for the tray loaded with covers.

  6. Press [Print Mode].

  7. Select the tray loaded with paper for body sets.

  8. Press Start on the control panel.

    A sample pattern of perfect-bound book is printed.

  9. Check that the edge of the right cover paper is neatly aligned with that of the left cover paper.

    [1] Left cover paper [2] Right cover paper [3] Trimming position

  10. If any adjustment is required, press [Exit PrintMode] to return to the [Cover Trimming Adjustment] screen.

  11. Use the touch panel keypad to enter the set value.

    • Use [+/-] to specify the value to be positive or negative.

    • Press [Set] to change the current value.

    • Adjustment Range: -128 ([To narrow]) to +127 ([To widen]) (1 step = 0.1 mm)

  12. Repeat steps 6 to 11 until the desired result is obtained.

  13. Press [Return].

    The screen returns to the [Perfect Binder Adjustment Menu] screen.