Adjust roller pressure time to folding point of booklet with fold & staple or multi half-fold in Saddle Stitcher SD-510 mounted on Finisher FS-532. Input value represents the number of second. Making the roller pressure time longer increases strength to fold booklets, yet decreases productivity.
Press [Adjustment] on the [MACHINE] screen to display the [Adjustment Menu] screen.
Press [Finisher Adjustment], [Staple Finisher Adjustment], [Staple Finisher(Fold) Adj.], and [Half-Fold Strength Adj.] in sequence.
Press [Print Mode].
Load the desired paper into a tray, then select that tray.
For [Output Setting], [Fold & Staple] is automatically selected.
Press Start on the control panel.
A sample pattern will be output.
Check if the strength in fold of printed paper is too weak.
Press [Exit PrintMode] to return to the [Half-Fold Strength Adjustment] screen.
If any adjustment is required, use the touch panel keypad to enter the set value.
Adjustment Range: (Additional time) 0 to +10 (1 step = 1 sec)
Press [Set] to change the setting with the Current Data.
Repeat steps 3 to 9 until the desired result is obtained.
Press [Return].
The screen returns to the [Staple Finisher(Fold) Adjustment Menu] screen.