Settings and Adjustments
- Adjustments
- Function Overview
- List of Adjustment Menu Items
- Machine Adjustment
- Printer Adjustment
- Restart Timing Adjustment: Adjusting the Image Position of Lead Edge in Paper Feed Direction in the Printer
- Centering Adjustment: Adjusting the Image Position in the Crosswise Direction in the Printer
- FD-Mag. Adjustment: Adjusting the Magnification in Paper Feed Direction in the Printer
- CD-Mag. Adjustment: Adjusting the Magnification in Crosswise Direction in the Printer
- Scan Adjustment
- Restart Timing Adjustment: Adjusting the Position to Start Scanning Originals
- Centering Adjustment: Adjusting the Image Position in the Crosswise Direction When Scanning Originals
- FD-Mag. Adjustment: Adjusting FD-Mag. When Scanning Originals
- CD-Mag. Adjustment: Adjusting the CD-Magnification When Scanning Originals
- Printer Adjustment
- Execute Adjust Operation: Adjusting in Adjustment Mode
- Finisher Adjustment (with Finisher FS-532)
- Staple Finisher (Main) Adjustment
- Staple Position Adjustment: Adjusting the Staple Positions
- Staple Paper Width Adj.: Adjusting the Staple Paper Width
- FD Alignment Plate Adj.: Adjusting the Insertion of the Alignment Unit of Staple Stacker
- Exit Guide Paper Width Adj.: Adjusting the Width of Exit Guides of the Finisher
- Rewind Paddle Descent Adj.: Adjusting the Rewind Paddle Descent
- Rewind Function Operation: Selecting the Rewind Function Operation
- Upper Gripper Operation: Selecting Upper Gripper Operation
- Output Alignment Operation: Selecting Output Alignment Operation
- Staple Finisher (Fold) Adjustment
- Fold&Staple Pitch Adj.: Adjusting the Staple Pitch on Fold & Staple
- Fold&Staple Paper Width Adj.: Adjusting the Width of the Adjustment Plates in the Saddle Stitcher
- Fold&Staple Staple Position: Adjusting the Staple Positions on Fold & Staple
- Fold&Staple Fold Position: Adjusting the Folded Position in Fold & Staple Mode
- Half-Fold Fold Position Adj.: Adjusting the Half-Fold Position
- Tri-Fold Position Adj.: Adjusting the Folded Positions in Multi Tri-Fold Mode
- Double Fold Plate Adjustment: Adjusting Double Fold Plate Insertion
- Half-Fold Strength Adj.: Making Roller Pressure Time Longer
- Staple Finisher (Punch) Adjustment
- Staple Finisher (PI) Adjustment
- Staple Finisher (Main) Adjustment
- Finisher Adjustment (with Folding Unit FD-503)
- Multi Folder (Punch) Adjustment
- Multi Folder (Fold) Adjustment
- Half-Fold Position Adj.: Adjusting the Half-Folded Position
- Tri-Fold-in Pos. Adj.: Adjusting the Folded Positions in Tri-Fold-in Mode
- Tri-Fold-out Pos. Adj.: Adjusting the Folded Positions in Tri-Fold-out Mode
- Double Parallel Pos. Adj.: Adjusting the Folded Positions in Double Parallel Mode
- Z-Fold Position Adj.: Adjusting the Folded Positions in Z-Fold Mode
- Gate Position Adj.: Adjusting the Folded Positions in Gate Mode
- Finisher Adjustment (with Large Capacity Stacker LS-506)
- Finisher Adjustment (with Saddle Stitcher SD-506)
- Saddle Stitcher Adjustment
- Staple Center Position Adjustment: Adjusting the Center Position of Staples
- Staple Paper Width Adj.: Adjusting the Width of Exit Guides to be Used in Staple Mode
- Staple Pitch Adjustment: Adjusting the Staple Pitch
- Half-Fold Position Adj.: Adjusting the Half-Folded Position
- Tri-Fold Position Adj.: Adjusting the Folded Positions in Tri-Fold Mode
- Fold Paper Width Adj.: Adjusting the Misalignment of the Printed Set
- Trimming Adjustment: Adjusting the Trimming Width
- Trimmer Receiver Adj.: Adjusting the Movement of the Trimmer Receiver
- Saddle Stitcher Adjustment
- Finisher Adjustment (with Perfect Binder PB-503)
- Perfect Binder Adjustment
- Cover Trimming Adjustment: Adjusting the Trimming Width of the Right-Hand Cover Sheet
- Cover Lead Edge Adj.: Adjusting the Edge of the Left-Hand Cover Sheet
- Spine Corner Forming Pos. Adj.: Adjusting the Form of Cover Sheets
- Glue Start Position: Adjusting the Glue Start Position on the Body Set
- Glue Finish Position: Adjusting the Glue Finish Position on the Body Set
- Temperature Adjustment: Setting Temperature on the Sensors inside the Melt Tank and of the Glue Apply Roller
- Sub Compile CD Width Adj.: Adjusting the Misalignment of Output Sheets in a Body Set in the Sub Compile Section
- Clamp CD Width Adj.: Adjusting the Misalignment in Body Pages
- Cover Up/Down CD Width Adj.: Adjusting the Misalignment in Body Pages and Cover Paper
- Clamp FD Position Adj.: Adjusting the Misalignment in Body Pages
- Perfect Binder Adjustment
- Finisher Adjustment (with Relay Unit RU-510)
- Density Balance Adjustment
- Applied Density Balance Adjustment Data
- Registering Colorimetric Data for Automatic Adjustment
- Outputting the Density Balance Chart
- Measuring the Colorimetric Data for Density Balance Chart Using the Spectrophotometer
- Registering Colorimetric Data in the Machine
- Entering New Density Balance Adjustment Data for Manual Adjustment
- Manually Adjusting the Existing Density Balance Adjustment Data
- Duplicating or Deleting Density Balance Adjustment Data
- Enabling or Disabling Density Balance Adjustment Data
- Color density control
- Periodical Adjustment (Auto Adjustment): Setting Color Density Control Automatically
- Manual Adjustment: Manually Performing Color Density Control
- Adj. of Color Sensor for Each Paper Type: Registering the Sensor Adjustment Data That is Adjusted to Paper Type (Color Sensor Adjustment Data for Each Paper Type)
- Checking Color Density Control Error
- ADF Adjustment
- ADF Original Stop Pos. Adj.: Adjusting the Position to Start Scanning on the ADF and the Image Position in the Crosswise Direction
- ADF Original Stop Pos. Auto: Automatically Adjusting the Position to Start Scanning on the ADF and the Image Position in the Crosswise Direction
- FD-Mag. Adjustment: Adjusting FD-Mag. When scanning on the ADF
- FD-Mag. Auto Adjustment: Automatically Adjusting FD-Mag. When scanning on the ADF
- PFU Air Assist Adjustment: Adjusting the Amount of Air Blow
Finisher Adjustment (with Finisher FS-532)
This section describes how to adjust the Finisher on the machine control panel when Finisher FS-532 is mounted.
Choose the item you want to learn about from contents on the left