Adjust the vertical side using the Perfect Binder PB-503 to reduce misalignment and skew of the body pages and cover paper.
Objects of Adjustment: Perfect Binder Tray, Except PB Tray
Press [Adjustment] on the [MACHINE] screen to display the [Adjustment Menu] screen.
Press [Finisher Adjustment], [Perfect Binder Adjustment], and [Cover Up/Down CD Width Adj.] in sequence.
Load cover paper in either Perfect Binder Cover Tray or any other tray.
Load paper for body sets in the desired tray.
Select either [Perfect Binder Tray] or [Except PB Tray] for the tray loaded with covers.
Press [Print Mode].
Select the tray loaded with paper for body sets.
Press Start on the control panel.
A sample pattern of perfect-bound book is printed.
Check that the horizontal scanning position of body set matches with that of the cover paper.
If any adjustment is required, press [Exit PrintMode] to return to the [Cover Up/Down CD Width Adjustment] screen.
Use the touch panel keypad to enter the set value.
Use [+/-] to specify the value to be positive or negative.
Press [Set] to change the current value.
Adjustment Range: -20 ([To reduce the distortion]) to +20 ([To reduce the misalignment]) (1 step = 0.1 mm)
Repeat steps 6 to 11 until the desired result is obtained.
Press [Return].
The screen returns to the [Perfect Binder Adjustment Menu] screen.