[CMYK Density]
Overview
The calibration measurement result is indicated by numeric values and graph.
Check the measurement result, and judge whether or not advanced calibration is required.
Setting Items
Setting item | Description |
|---|---|
C / M / Y / K | Select this check box to display the measurement curve of the selected color in the graph. |
[Measure] [D-Max] | Displays the [D-Max] measured at the time of calibration or [Accuracy Measurement]. [D-Max] refers to the maximum density. If the actual measured value is too lower than [D-Max], high-density colors may not be correctly output. If the actual measured value is too higher than [D-Max], the gradation may become rough. Data of 0% to 100% is output with a few steps (example: 0% to 80%). |
[Target] | Select this check box to display the target curve of the recommended paper for the selected paper type in the graph. |
[Density(before Calibration)] | Select this check box to display the uncalibrated measurement curve in the graph. |
[Density(after Calibration)] | Select this check box to display the calibrated measurement curve in the graph. |
[CMYK Density] graph | The following measurement curves are displayed.
|
in the upper-right of a page, it turns into 
and is registered as a bookmark.