What Is [Trimmer Unit Adjustment]?
Overview
Make various adjustments for Trimmer Unit TU-510.
This function allows you to adjust the trimming position, crease position, or paper feeding position.
NOTICE
- The optional Trimmer Unit TU-510 is required to use this function.
NOTICE
- The Trimmer Unit TU-510 has different specifications depending on the production period. For details about the specifications of each version, refer to [Trimmer Profile] or Trimmer Unit TU-510.
Setting Items
Screen access
Touch panel - [MACHINE] - [Adjustment] - [Finisher Adjustment] - [Trimmer Unit Adjustment]
Setting item | Description |
|---|---|
Adjust a skew in the paper feed direction. | |
Adjust the trim position, slit position, crease position, and perforation position of Trimmer Unit TU-510. | |
Adjust a skew amount of a steering roller. | |
Adjust the alignment amount in the crosswise direction of [Four Edge Trim Mode] on the Trimmer Unit TU-510. | |
[Switch Card 2 Rows/3 Rows] | Set whether to open or close the shutter when switching the card partition plate position depending on the 2-row or 3-row type for card printing. For details, refer to Before Card Cutting. |
in the upper-right of a page, it turns into 
and is registered as a bookmark.