[Trimmer Profile]
By mounting optional devices, this system can perform processing such as Four Edge Trim for trimming, Multiple Cutting for cutting to 2 sheets, and Card Cutting for cutting to the card size. A trimmer profile is a function that pre-registers the advanced settings of the above processing, and recalls and uses the desired one as necessary.
NOTICE
- The optional Trimmer Unit TU-510 is required to use [Trimmer Profile].
NOTICE
The Trimmer Unit TU-510 has different specifications depending on the production period. In this manual, the specifications are classified for explanation as follows. For details, contact your service representative.
- WY1: Mass-produced early model version
- WY2: Version in which the CD trim unit is changed and the CD trim width is expanded
- WY3: Version compatible with Trimmer Unit TU-504 (WY2) / Perforation Unit PE-101 (WY2) / Perforation Unit PE-102 (WY2)
NOTICE
The Trimmer Unit TU-504 has different specifications depending on the production period. In this manual, the specifications are classified for explanation as follows. For details, contact your service representative.
- WY1 (Trimmer Unit TU-504): Mass-produced early model version
- WY2 (Trimmer Unit TU-504): A version that enables the use of the new functions of the gutter slit unit
NOTICE
The Perforation Unit PE-101 / Perforation Unit PE-102 has different specifications depending on the production period. In this manual, the specifications are classified for explanation as follows. For details, contact your service representative.
- WY1 (Perforation Unit PE-101 / Perforation Unit PE-102): Mass-produced early model version
- WY2 (Perforation Unit PE-101 / Perforation Unit PE-102): Version with the perforation function extended
Set the detail of the cut type, cutting amount, and cut position to suit the cutting shape.
The following cut types are available.
In the descriptive illustrations, solid lines represent trims and dotted lines represent creases or perforations.
Cut type | Description | Available paper size | |
|---|---|---|---|
[Four Edge Trim] |  | Cuts four sides of paper. Creases or perforations can be set. | [Crease]: 140.0 mm e 153.0 mm to 330.2 mm e 1,300.0 mm / 5.51" e 6.02" to 13" e 51.18" [Perforation]: 140.0 mm e 153.0 mm to 330.2 mm e 487.7 mm / 5.51" e 6.02" to 13" e 19.20" |
[Multiple Cutting] |  | Cuts paper to 2 sheets. | 140.0 mm e 266.0 mm to 330.2 mm e 487.7 mm / 5.51" e 10.47" to 13" e 19.20" |
[Card Cutting] |  | Cuts paper to the card size. | WY1: 287.0 mm e 370.0 mm to 330.2 mm e 457.2 mm / 11.3" e 14.57" to 13" e 18" WY2 or later: 210.0 mm e 279.4 mm to 330.2 mm e 470.0 mm / 8.27" e 11.0" to 13" e 18.50" |
[1x1-3x3 Cutting(CR)] |  | Set the layouts from 1 e 1 to 3 e 3 to trim the paper. You can also set the crease position. | 140.0 mm e 143.0 mm to 330.2 mm e 487.7 mm / 5.51" e 5.63" to 13" e 19.20" (Extensible up to 140.0 mm e 143.0 mm to 330.2 mm e 1,300 mm / 5.51" e 5.63" to 13" e 51.18".*1) |
[1x1-1x3 Cutting(PE)] |  | Set the layouts from 1 e 1 to 1 e 3 to trim the paper. You can also set the perforation position. | 140.0 mm e 143.0 mm to 330.2 mm e 487.7 mm / 5.51" e 5.63" to 13" e 19.20" (Extensible up to 140.0 mm e 143.0 mm to 330.2 mm e 1,300 mm / 5.51" e 5.63" to 13" e 51.18".*1) |
*1: For information about the extension of the available paper size, contact your service representative.
in the upper-right of a page, it turns into 
and is registered as a bookmark.